KRAMER - 9-INPUT PROSCALE PRESENTATION SWITCHER/SCALER

FEATURES

• K-IIT XL Picture-in-Picture Image Insertion Technology - Ultra-stable picture-in-picture, picture-and-picture, and split screen capability. Any video source can be inserted into or positioned next to any other video source with full window positioning and sizing controls.
• Kramer's PixPerfect Scaling Technology - Kramer's precision pixel mapping and high quality scaling technology. High-quality 3:2 and 2:2 pull down de-interlacing and full up and down scaling of all video input signals.
• Ultra-Fast Fade-Thru-Black (FTB) Switching - Video switching transitions are clean and ultra fast. The video fades to black and the new input fades from black for smooth, glitch-free switching. The output signal provides constant sync so the display never glitches.
• Advanced Deinterlacing Functions - Method, sync, selectable film modes, diagonal correction and motion detection sensitivity, 3:2 and 2:2 pull-down; 24sf handling.
• HDTV Compatible.
• HDCP Compliant - The HDCP (High Definition Content Protection) license agreement allows copy-protected data on the HDMI input to pass only to the HDMI output.
• Multi-Standard Operation - SDI (SMPTE 259M and SMPTE 344M), HD-SDI (SMPTE 292M) and 3G HD-SDI (SMPTE 424M).
• Advanced Input and Output EDID Management.
• Mass Notification Emergency Communication System (MNEC) - Activates a national or campus-wide notification, immediately displayed when an emergency situation develops. It uses automatic text overlaying, either via a crawler or a full screen cover up, as well as an optional audio alert.
• DGKat Signal Integration - Kramer's unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables.
• System Range - Up to 90 m (295 ft) at 1080i at 60 Hz or up to 70 m (230 ft) at 1080p at 60 Hz when using Kramer DGKat cables. Note: Transmission range depends on the signal resolution, graphics card and display used. If using third-party shielded CAT cables, both ends of the shield must be soldered to the connectors for the products to function properly.
• Video Inputs - Component (Y, Pb, Pr) video on RCA connectors, DisplayPort (DP), SD/HD/3G HD-SDI (including SDI loop) on BNC connectors, 2 computer graphics on 15-pin HD connectors, 2 composite video on RCA connectors and 2 HDMI.
• Scaled Outputs - HDMI, computer graphics on a 15-pin HD connector, SD/HD/3G HD-SDI on a BNC connector and DGKat twisted pair on an RJ-45 connector.
• SDI Channeling - Select one active signal and three bypassed signals from eight embedded stereo audio channels.
• Multiple Output Resolutions - Up to 2K and 1080p.
• HDMI Deep Color Support.
• Luma Keying - Via PIP window.
• Vertical Keystoning.
• Built-in ProcAmp - Color, sharpness, contrast, brightness and gamma are set individually for each input.
• 3D Comb Filtering - Provides the best quality color separation for composite video inputs.
• Built-in Time Base Corrector - Stabilizes unstable video sources.
• Powerful Noise Reduction Filters - Temporal, block, mosquito and combing.
• Picture Zooming - Both on main and PIP window from 100% to 1600%, including separate V and H sharpness control.
• Multiple Aspect Ratio Selections - Follow input, follow output, best fit, letterbox and overscan.
• Dual Window Display - Preset picture-in-picture, picture-and-picture and split screens, as well as customized window layouts.
• Audio Inputs - 2 HDMI, 2 computer graphics and 1 DisplayPort and 1 microphone in on 3.5 mm mini jacks; 2 CV and 1 S/PDIF on RCA connectors.
• Audio Outputs - 1 S/PDIF on an RCA connector, 1 unbalanced stereo audio on a 3-pin terminal block connector.
• Built-in Audio Power Amplifier - 10 W per channel audio amplifier with speaker outputs.
• HDMI Audio - Embeds/de-embeds HDMI audio with delay of 0 - 90 msec for lip-sync correction.
• Microphone Input - Supports mix and talk-over features, as well as 0 - 90 msec delay to prevent feedback.
• Non-Volatile Memory - Saves final settings.
• Firmware Upgrades - Via Ethernet and RS-232.
• Flexible Control Options - Front panel buttons, contact closure, OSD (on-screen display) via front panel buttons or IR remote (remote control included), Control Application software for use via Ethernet and RS-232.
• Selectable Power Save Modes.
• Worldwide Power Supply - 100 - 240 VAC.

APPLICATIONS

• Projection systems in conference rooms, boardrooms, auditoriums, hotels and churches, production studios, rental and staging.
• Any application where high quality conversion and switching of multiple and different video signals to graphical data signals is required for projection purposes.