URC - 2 WAY NETWORK BASE STATION WITH ADDITIONAL RS-232 CAPABILITY

Item Code : MRX-2

Stock Status : 5
Next Quantity : 9
Next ETA Date : 04-27-2018
  • Availability: In stock

URC - 2 WAY NETWORK BASE STATION WITH ADDITIONAL RS-232 CAPABILITY

2 Way Network Base Station With Additional RS-232 Capability

The MRX-2 Network Base Stations bridges the digital divide between control of clients’ legacy components and the IP network. Acting as a Total Control “Control Expander,” it receives commands from a TC Master Controller (such as the MRX-10) and reissues them via IR, RS-232, or Relays. Each MRX-2 has the following: one relay, one sensor port, two RS-232 ports and 6 IR ports. The advanced connectivity of the MRX-2 allows it to connect to virtually any device or component.

Attention CCP Programmers: the MRX-2 can also be installed independent of Total Control and operated by a URC MX-5000, MX-6000, KP-4000C, or CCP's MX-iOS Application (which are not compatible with Total Control).

The MRX-2 Network Base Station bridges the digital divide between control of clients legacy components and the IP network. Each MRX-2 has the following: one relay, one sensor port, two RS-232 ports and 6 IR ports. The advanced connectivity of the MRX-2 allows it to connect to virtually any device or component.

Important Note: When utilizing the MRX-2 as a RF Basestation (using the RFX-250), you will not have access to the RS-232, Relay, or Sensor ports on the basestation. These ports can only be controlled by IP Control Interfaces such as the MX-iOS, MX-Android, and KP-4000 (In the CCP Lineup).

Features

  • Network: One 10/100 Ethernet port
  • Relay: One relay configurable to be NO, NC or Momentary
  • Sensor: One sensor supports Video or Voltage sensing via URC sensors.
  • RS-232: Two RS-232 ports support TX, RX and GND two way communication via URC cables.
  • IR: Six adjustable IR ports enable the included URC emitters to control IR devices Note: 6th IR Output requires the included sleeved emitter (identified by a pink connector), since it can optionally be used to connect an RFTX-1
  • Weight: 8.4 oz.
  • Size: 248 x 120mm x28mm
  • Power: 12V External Power Supply

Package Contents

  • (1) RF Base Station
  • (1) Wall Mount
  • (1) AC Power Adapter
  • (6) IR Emitters
  • (1) Manual
  • (1) Adjustment Tool
  • (1) Connecting Cable