Press and move to zoom.
Mouse over image to zoom.

Phoenix Audio


SKU: MT600
Status: 2 In stock
Sold Per: Each
Web Comments: Limited inventory: long-term stock out from Manufacturer


The Condor Beamforming Microphone Array was created with the goal of decluttering conference rooms. The Condor, featuring a built-in SIP phone, sits above or below your monitor, eliminating cumbersome devices and wires from the conference table. It can easily connect to any video conferencing system, and use any external sound bar or your monitor’s internal speakers.

The Condor is completely changing the look and dynamics of conference rooms.


  • USB Cable
  • 5V Power Supply
  • 2 Wall Mounting Brackets and 2 Stands


  • Highly directional, 48-inch aperture,
  • 15-microphone array
  • Seven fixed-direction directional beams with Constant Beamwidth design
  • Pickup range up to 30 feet with optimal recommended range of up to 25 feet
  • Angular reception – 180 degrees
  • Algorithms: DSP based noise canceling, echo canceling. AGC, De-reverb
  • 100% full duplex
  • Digital interface using USB telephony protocol
  • Analog interface for use with Analog Codecs
  • Built-in IP phone (SIP)
  • Automatic bridging between the IP phone and USB communication


  • USB – both data and power
  • Analog Speaker In via two RCA jacks (left and right signals)
  • Analog Speaker Out via two RCA jacks (left and right signals)
  • Analog System Out (microphone output) via RCA jack (line level)
  • Digital Speaker In via optical link (stereo)
  • Digital Speaker Out via optical link (stereo)
  • RJ45 Ethernet link – for network connection and IP phone


The Condor comes with two installation optoins:

  • Wall mounting; the Condor comes with two wall mounting brackets
  • Stands; two stands are provided to placing the Condor on a flat surface
  • Brackets for TV Mount available (sold separately).


Performance Parameters:
Frequency response: 50Hz – 16KHz
Noise Suppression: >15dB – no pumping noise
Echo Canceling: >40dB with conversion rate >40dB/sec
Residual echo: Suppressed to environment noise level preventing artificial ducking
Low latency: 10Msec
Power consumption: 500mAmp (from USB or POE)
Supported Codecs: G.711 (A-law and Mu-law)
G.729A (Annex B)
Dimensions (W x H x D): 2.5" x 2.5" x 48"
Weight: 3.35 lb
VoIP and Signaling: SIP –RFC 3261, SDP – RFC 2327 SIP over
TCP/UDP, Redundancy, Digest
Authentication, PRACK, Early Media
Data Protocols: IPv4, TCP, UDP, ICMP, ARP, RTP, SRTP,
Static IP/DHCP IP Assignment, IEEE 802.1p/Q,
Plug-and-Play: No installation or additional drivers required
Audio Setup Utility: Available for Windows
Recording utility: Available for Windows
Operating systems: Windows 98 and up / Linux / MacOS
You may also be interested in