LUTRON - TEN VOLT INTERFACE
Press and move to zoom.
Mouse over image to zoom.

Lutron Lighting

LUTRON - TEN VOLT INTERFACE

SKU: GRX-TVI
Status: 9 In stock
Sold Per: Each

LUTRON METALLIC TEN VOLT BALLAST FOR USE WITH INCANDESCENT/LED, LOW-VOLTAGE, METAL HALIDE, NEON/COLD CATHODE, 12 AWG, 100 - 277 V, 9.5 W

FEATURES

  • 100-277 V forward, reverse, and center phase control input capability
  • Provides 0-10 V control and switching capabilities to switch and dim current sourcing fluorescent ballasts and LED drivers
  • Switches and dims current sourcing 0-10 Velectronic dimming ballasts or drivers powered by 100-277 V. Switches up to 16 A of electronic capacitive ballasts or drivers
  • Switches motors up to 1/2 HP at 100-120 V, 1-1/2 hp at 200-277 V and 5 A at 230 V CE
  • Up to five Ten-Volt interfaces may be connected to one control unit zone. This allows one zone to control up to five 16 A circuits of electronic dimming ballasts or drivers or five motors
  • Provides 100-277 V power to loads
  • Requires 100-277 V power for internal operations

Regulatory Approvals

  • cULR Listed in US and Canada
  • CE
  • NOM (Mexico)
  • Complies with requirements for use in other spaces used for environmental air (plenums) per NECR 2014 300.22(C)(3)
  • Meets the Canadian National Building Code plenum requirements for a concealed space used as a plenum within a floor or roof assembly

Power

  • Control and Load circuits are independent of each other and can have unique phases
  • Works with all ballasts and drivers that provide a current source that is compliant to IEC 60629 Annex E.2, and whose inrush current does not exceed NEMA410 standards for electronic ballast/driver

Key Design Features

  • Complies with UL508 Standard
  • Provides a Class 2 isolated 0-10 V output signal that conforms to EN60929 and IEC929
  • Accepts a forward, reverse and center phase control signal
GRX-TVI
Sub BrandGRAFIK EyeR
TypeMetallic, Ten Volt
Lamp TypeIncandescent/LED, Low-voltage, Metal Halide, Neon/Cold Cathode
Wire Size12 AWG
Phase1
Voltage Rating100 - 277 V
Frequency Rating50/60 hz
Amperage Rating16 A at 100 - 277 V, 10 A 230 V
Power Rating9.5 W
Minimum Starting Temperature0 - 40 deg C
Dimensions6.1 Inch L x 3.3 Inch W x 12-1/2 Inch H
Mounting TypeWall
EnclosureNEMA 1
Environmental Conditions0 - 90% Humidity, Non-Condensing
File Download(s):Cut Sheet |Installation Instruction |