LUTRON - TEN VOLT INTERFACE

FEATURES

• 100-277 V forward, reverse, and center phase control input capability
• Provides 0-10 V control and switching capabilities to switch and dim current sourcing fluorescent ballasts and LED drivers
• Switches and dims current sourcing 0-10 Velectronic dimming ballasts or drivers powered by 100-277 V. Switches up to 16 A of electronic capacitive ballasts or drivers
• Switches motors up to 1/2 HP at 100-120 V, 1-1/2 hp at 200-277 V and 5 A at 230 V CE
• Up to five Ten-Volt interfaces may be connected to one control unit zone. This allows one zone to control up to five 16 A circuits of electronic dimming ballasts or drivers or five motors
• Provides 100-277 V power to loads
• Requires 100-277 V power for internal operations

Regulatory Approvals

• cUL Listed in US and Canada
• CE
• NOM (Mexico)
• Complies with requirements for use in other spaces used for environmental air (plenums) per NEC 2014 300.22(C)(3)
• Meets the Canadian National Building Code plenum requirements for a concealed space used as a plenum within a floor or roof assembly

Power

• Control and Load circuits are independent of each other and can have unique phases
• Works with all ballasts and drivers that provide a current source that is compliant to IEC 60629 Annex E.2, and whose inrush current does not exceed NEMA410 standards for electronic ballast/driver

Key Design Features

• Complies with UL508 Standard
• Provides a Class 2 isolated 0-10 V output signal that conforms to EN60929 and IEC929
• Accepts a forward, reverse and center phase control signal