Search
Products
    Menu Close

    LUTRON - RADIORA2 SEETOUCH 3 SCENE W/ RAISE-LOWER WALL KEYPAD (WHITE)

    Manufacturer: Picture for manufacturer Lutron Lighting

    LUTRON - RADIORA2 SEETOUCH 3 SCENE W/ RAISE-LOWER WALL KEYPAD (WHITE)

    SKU: RRD-W3S-WH
    Availability: Special Order
    Call for pricing

    LUTRON - RADIORA2 SEETOUCH 3 SCENE W/ RAISE-LOWER WALL KEYPAD (WHITE)

    Use only Lutron Designer (Claro or Satin Colors) wallplates. The mechanical design of the keypad is ONLY compatible with Lutron wallplates and is NOT compatible with any other manufacturer’s wallplate. Wallplates are sold separately. Lutron Claro and Satin Colors wallplates snap on with no visible means of attachment.

    RadioRA 2 wall-mount designer keypads provide homeowners with a simple and elegant way to operate lights, shades /draperies, motorized screens, and many other devices.

    RadioRA 2 keypads feature large, easy-to-use buttons, plus a unique backlit engraving option that makes the keypads readable any time of the day or night. The keypad buttons are rounded, allowing engraving to be displayed at an upward angle, increasing readability.

    Replacement Kits are available in a variety of colors and with custom engraving to clearly identify each button’s function. The flexible design of the keypads allow the color, number of buttons, and the configuration of the buttons to be changed after the keypad is installed.

    FEATURES

    • At the press of a single button, lights fade ON or OFF to desired levels and shades/draperies open or close to desired positions.
    • Light levels and shade/drapery positions can be fine-tuned by pressing and holding the raise/lower buttons.
    • Programmable to select scene or room preset levels or positions.
    • Adjustable backlight intensity.
    • Configurable Raise/Lower selection using programming software.
      • Last button pressed (default) - devices controlled by the last button pressed will raise/lower.
      • Double-tap - devices controlled by a double-tapped button will raise/lower.
      • Programmed devices - only the devices programmed to the button will raise/lower.
    • Prepaid engraving included. Redeemable for one engraved Replacement Kit.

    SPECIFICATIONS

    RRD-W3S-WH
    Power 120 V~ 50/60 Hz 0.5 A
    Typical Power Consumption 0.6 W Test conditions: all backlights on medium intensity, two LEDs on (two presets active), keypad powered at 120 V~
    Regulatory Approvals UL, CSA, NOM, FCC, IC, COFETEL, ANATEL
    Environment Ambient operating temperature: 32 °F to 104 °F (0 °C to 40 °C), 0% to 90% humidity, non-condensing. Indoor use only.
    Communications Wall-mount designer keypads communicate with the system through Radio Frequency (RF) and must be located within 30 ft (9 m) of a repeater. System devices operate on frequencies between 431.0 MHz and 437.0 MHz.
    ESD Protection Tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2.
    Surge Protection Tested to withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits.
    Power Failure Power failure memory: should power be interrupted, the keypad will return to its previous state when power is restored.
    Mounting Requires a U.S. wallbox. 3½ in (89 mm) deep recommended, 2¼ in (57 mm) deep minimum.
    Wiring Wall-mount designer keypads require a neutral wire connection.

    SUPPORT

    File Download(s): Cutsheet |
    *
    *
    *
    Products specifications
    Color White
    Type Hybrid Keypad
    Series RadioRa2