Search
Products
    Menu Close

    LUTRON - RADIORA2 1000W DIMMER (LIGHT ALMOND)

    Manufacturer: Picture for manufacturer Lutron Lighting
    LUTRON - RADIORA2 1000W DIMMER (LIGHT ALMOND)
    SKU: RRD-10D-LA
    Availability:
    Richmond : 0
    Special Order

    Mississauga : 0
    Special Order
    Call for pricing

    RADIORA 2 MAESTRO® LOCAL CONTROLS

    RadioRA 2 Maestro local controls function much like standard dimmers and switches, but can be controlled as part of a lighting control system. Local lighting controls are useful in locations where single circuits of lighting need to be dimmed or switched.

    RadioRA 2 Maestro dimmers incorporate advanced features such as fade on / fade off, delayed long fade to off, and rapid full on.

    RadioRA 2 Maestro local controls include a Front Accessible Service Switch (FASSTM) for safe lamp replacement. RadioRA 2 Maestro local controls install in single-pole or multi-location applications. Remote dimmers / switches are available for multi-location control.

    Use Lutron® Designer (Claro® or Satin Colors®) wallplates or designer-style wallplates from other manufacturers. Wallplates are sold separately. Lutron Claro and Satin Colors wallplates snap on with no visible means of attachment. RadioRA 2 Maestro local controls support color change kits.

     

    FEATURES

    Design Features

    • On a single-tap, lights fade ON or OFF.
    • On a double-tap, lights go to full ON.
    • When ON, press and hold the tapswitch to engage the delayed long fade to OFF.
    • Light levels can be fine-tuned by pressing and holding the dimming rocker until the desired light level is reached.
    • Neutral and two-wire dimmers available.

     

    SPECIFICATIONS

    Main Specifications

    • 1000 W / 1000 VA Dimme
    • Incandescent / Halogen / MLV (120 V )
    Model Number RRD-10D-LA
    Power 120 V 50 / 60 Hz (-6D, -10D, -10ND, -6NA, -8ANS, -RD, -RS) 120 – 277 V 50 / 60 Hz (-F6AN-DV, -8S-DV) 277 V 50 / 60 Hz (-RD-277, -RS-277)
    Typical Power Consumption

    Dimmer / Switch: 0.2 W

    Test conditions: load is off and nightlight mode is enabled.

    Remote Dimmer / Switch: 0 W

    Test conditions: load is off.

    Regulatory Approvals UL, CSA, NOM, FCC, IC, COFETEL
    Environment Ambient operating temperature: 32 °F to 104 °F (0 °C to 40 °C), 0% to 90% humidity, non-condensing. Indoor use only.
    Communications Dimmers and switches communicate with the system through Radio Frequency (RF) and must be located within 30 ft (9 m) of a repeater. Remote dimmers / switches are not required to be within a specific range of a repeater. System devices operate on frequencies between 431.0 MHz and 437.0 MHz.
    ESD Protection Tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2.
    Surge Protection Tested to withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits.
    Power Failure Power failure memory: should power be interrupted, the control will return to its previous state when power is restored.
    Mounting Requires a U.S. wallbox. 3 ½ in (89 mm) deep recommended, 2 ¼ in (57 mm) deep minimum.
    Wiring Uses conventional 3-way and 4-way wiring.
    File Download(s): Technical Documentation
    *
    *
    *
    Products specifications
    Finish Gloss
    Control Type In-Wall Dimmer
    Type Dimmer
    Color Light Almond
    Series RadioRa2
    Wiring Type No Neutral Required
    Product tags