STRONG - RAZOR ARTICULATING MOUNT FOR 37 - 70" DISPLAYS (BLACK)
Press and move to zoom.
Mouse over image to zoom.

Strong Mounts

STRONG - RAZOR ARTICULATING MOUNT FOR 37 - 70" DISPLAYS (BLACK)

SKU: SM-RAZOR-ART2-L
Status: 28 In stock
Sold Per: Each

Strong™ Razor Articulating Mount for X-Large Flat-Panel TVs (Black)

Engineered for today’s low-profile flat panel displays, the SM-RAZOR-ART2-L sits a slim 1.6-in. off the wall when fully collapsed. It features an easy-to-install, three-piece construction – meaning you don’t need a second installer to hang it – and its curved cast-aluminum arms are not only lightweight and strong, but they look great too. Chock full of installer-friendly features like post-installation leveling, tilt and vertical adjustments, this mount makes your install thinner – and your life easier.

1-Person Installation: Installing an articulating mount shouldn’t require three arms. That’s why this product features a smart 3-piece construction – wall bracket, arm assembly, and TV plate – so it can be installed by just one person…with two arms. The cast aluminum arms are lighter and easier to handle, while still providing plenty of strength. Sure it costs more to produce it this way, but we think your job (and your back) are worth it.

1. Secure wall bracket

2. Hang arm assembly

3. Attach TV plate

4 Easy Adjustments: Ever had to remove the TV from the wall just to make a small leveling or tilt adjustment? Never again thanks to this mount design. It offers post-installation leveling, height and tilt adjustments to get things perfect. And if that isn’t enough, during the install the arms can be offset up to 4.25-in. left and right to quickly center the TV.

  • Centering: Sometimes studs aren’t exactly where you need them, but this mount takes care of that. Before securing the arm assembly to the wall mount, slide it 4.25-in. left and right to get it perfectly centered.
  • Height: Tweak the height up to 1-in. post-install, thanks to this handy vertical adjustment screw.
  • Leveling: Rest the TV plate on the arm assembly and roll it four degrees left and right for fast and easy leveling. Once it’s perfect, just tighten down the bottom screws and you’re good to go.
  • Tilt: The arm assembly base plate has a tilt angle of -12 degrees to +5 degrees, making it easy to get the TV at the perfect viewing angle. No tool required unless you want to fine tune it for the perfect feel.

Adjustable Home Position Latch: Sometimes heavier TVs can creep or tilt away from the wall over time. To prevent this, our engineers designed an adjustable home position latch to snap the TV into place – and keep it there.

Bracket Keyholes: When you’re struggling to keep the wall bracket level while reaching in your pocket for bolts and fumbling for a drill, it can feel more like a three-ring circus than an install. With this product’s smart design, we cut the chaos by enabling you to mark and measure your hole locations ahead of time, secure the bolts in the wall, and then slide the mounting bracket into place.

Low-Profile Design, Professional Finish: Today’s ultra-thin TVs have met their match in the SM-RAZOR-ART2-XL . Fully collapsed it sits just 1.6-in. off the wall, so it doesn’t add any unnecessary bulk. And when you pull it away from the wall, there’s no mess of wires or distracting bolts thanks to the product’s all-black hardware and snap-in covers.

Smooth Motion: Swiveling up to 180 degrees and extending out from the wall a whopping 25.5-in., this mount moves fluidly with minimal force required.

Bigger is Better: Using the included extension bracket, get support for VESA patterns all the way up to 800x600 – perfect for those extra big displays. And even without the bracket this mount provides plenty of support, fitting displays with VESA patterns of 800x400.

 Download the Manual

 Download the Cutsheet