JBL PRO - CONTROL 50CS / T SUBWOOFER WHITE
Press and move to zoom.
Mouse over image to zoom.

JBL PRO

JBL PRO - CONTROL 50CS / T SUBWOOFER WHITE

SKU: CONTROL-50S/T-WH
Status: 5 In stock
Sold Per: Each

JBL PRO CONTROL 50 SURFACE MOUNT SUBWOOFER, 8 INCH WOOFER, 200 W, 32 - 200 HZ, POLYPROPYLENE, WHITE

Surface-Mount Subwoofer for Subwoofer-Satellite Loudspeaker System

The 150 W (600 W Peak) Control 50S/T subwoofer contains a high-power, long-excursion, 200 mm (8 Inch) driver which features an extremely robust high-mass cone for extended low frequency response, a 38 mm (1.5 Inch) 4-layer copper voice coil for high motor strength, an aluminum former for good transient response and a rubber half roll surround for enhanced bass performance.

FEATURES

  • Full bandwidth 32 hz - 20 khz high fidelity sound
  • Selectable 70 V/100 V for distributed lines or low impedance
  • Versatility for either two or four satellite speakers per system
CONTROL-50S/T-WH
Series Control 50
Type Surface Mount
Transformer Taps 70 V: 80 W, 40 W, 20 W and 10 W
Woofer Diameter 8 Inch
Power Rating 300 W Continuous Program Power (2 hr), 150 W Continuous Pink Noise (2 hr), 200 W Continuous Program Power (100 hr), 100 W Continuous Pink Noise (100 hr)
Sensitivity 95 dB (Near Corner), 89 dB (Center of Wall)
Nominal Coverage Angle 45 deg
Sound Pressure Level Near Corner: 115 dB (Average), 121 dB (Peak), Center of Wall: 109 dB (Average), 115 dB (Peak)
Frequency Rating 32 - 200 hz
Frequency Response 50 - 150 hz
Impedance 8 ohm (Nominal)
Voice Coil 1-1/2 Inch 4-Layer Copper Clad Aluminum
Cone Material Polypropylene
Cone Surround Butyl Rubber
Connectors (6) Removable Locking 2-Pin with Screw-Down Terminals
Grill Material Painted Zinc-Plated Metal
Bracket Material Zinc-Plated and Painted Cold-Rolled Steel
Color White
Dimensions 15.4 Inch W x 8 Inch D x 14 Inch H (Cabinet), 0.6 Inch D (Wall Bracket)
Includes Wall Bracket (Both Speaker and Wall Parts) with (4) M6 Screws to Attach to Speaker, Terminal Cover, (6) 2-Pin Locking Connectors, M6 Screw for Safety Lanyard Attachment
Weight 20 lb
File Download(s): Cut Sheet | Installation Instruction |