EPISODE - 8 CHANNEL 70 WATTS DIGITAL AMPLIFIER WITH AUTO POWER
Press and move to zoom.
Mouse over image to zoom.

EPISODE - 8 CHANNEL 70 WATTS DIGITAL AMPLIFIER WITH AUTO POWER

Item Code : EA-AMP-8D-70A

Stock Status : 5
  • Availability: In stock

Episode® 70 Watts per Channel Digital Amplifier (8 Channels - 2U Size - Audio Sense - Global A/B Inputs)

The Episode® EA-AMP-8D-70A is an efficient eight-channel, Class-D amplifier that delivers a powerful 70 watts RMS per channel. Perfectly at home in multi-room applications, it features audio sensing turn-on, loop outputs, adjustable gain control and bridgeable outputs, giving installers the versatility required for today's sophisticated audio systems.

Digital Amplification: Our engineers have combined advanced digital amplifier technologies with installer-friendly features to create a robust power plant built from the ground up for today's multi-channel audio applications. Unlike analog amplifiers from the competition, our digital amplifiers are much more energy efficient and run up to 80% cooler. Plus, with a reduced need for heat sinks, you'll save space too with a chassis that's up to 30% smaller than traditional analog amplifiers!

Audio-Sensing and 12V Trigger Turn-OnThree convenient turn-on: modes make it easy to integrate with simple volume controls or sophisticated control systems. Audio-sense is perfect for Sonos or Apple Airplay multi-room audio – when the last source shuts down, the amplifier will gracefully go into a power-saving standby mode. The 12V trigger inputs and outputs allow you to use a preamp or control system to turn the amp on or off, or have it "wake up" another device when the amp is activated.

Global Inputs and Loop Outputs: From single source with volume controls (Global A/B) to independent sources at each room (Direct) – or any combination in between – this amplifier has the flexibility you need. Global A/B provides two independent global sources that can be mapped to desired channel pairs. When using a stack of amplifiers, the loop outputs are a convenient way to daisy-chain the signal to downstream components. This eliminates the need for RCA splitters and gives a much cleaner (and faster) install.

Bridgeable Speaker Outputs: For larger speakers or high-power applications, bridgeable channels allow you to combine any 2 channels into a single 140W channel. For example, run 2 "standard" zones of audio plus one high power zone. Or use this amplifier as the ultimate bi-amping solution for two-channel applications with 4 bridged channels!

Gain Controls: The EA-AMP-8D-70 offers gain adjustments for each channel pair, allowing you to independently trim output levels in each zone. In volume control-based systems, these may be used to prevent harmful clipping that could cause damage to the amplifier or speakers.

Built-In Surge Protection: Multi-room AV environments can be tough on an amplifier. Each speaker run acts like an antenna, so all kinds of nasty things can happen when the weather changes. That’s why we engineered this amp with surge protection components that exceed CE Level 3 standards. During development, every connection was tortured using a lighting simulator – all speaker outputs, RCA connectors even the power input have been surged tested with up to 15,000V. Most importantly, though, they each lived to tell about it.

Grounds for Improvement: If you’ve ever experience hum from your speakers or noise on your TV, odds are it was due to system grounding. This amplifier was engineered for not only the best surge protection but also with an isolated common ground for the audio circuits. The result is a great sounding, and reliable system that your customer will enjoy for years.

What is GEMtech™?: Green Energy Management technology is a stringent product design criteria established by SnapAV that focuses on energy savings through active energy management circuitry.

Installation Flexibility: A slim 2U chassis takes up less space when stacked on a shelf or installed in a rack. Included removable rack ears and amplifier feet give you the flexibility to install it where you need.

Episode® 70 Watts per Channel Digital Amplifier (8 Channels - 2U Size - Audio Sense - Global A/B Inputs)
The Episode® EA-AMP-8D-70A is an efficient eight-channel, Class-D amplifier that delivers a powerful 70 watts RMS per channel. Perfectly at home in multi-room applications, it features audio sensing turn-on, loop outputs, adjustable gain control and bridgeable outputs, giving installers the versatility required for today's sophisticated audio systems.

Digital Amplification
Our engineers have combined advanced digital amplifier technologies with installer-friendly features to create a robust power plant built from the ground up for today's multi-channel audio applications. Unlike analog amplifiers from the competition, our digital amplifiers are much more energy efficient and run up to 80% cooler. Plus, with a reduced need for heat sinks, you'll save space too with a chassis that's up to 30% smaller than traditional analog amplifiers!

Audio-Sensing and 12V Trigger Turn-On Three convenient turn-on modes make it easy to integrate with simple volume controls or sophisticated control systems. Audio-sense is perfect for Sonos or Apple Airplay multi-room audio – when the last source shuts down, the amplifier will gracefully go into a power-saving standby mode. The 12V trigger inputs and outputs allow you to use a preamp or control system to turn the amp on or off, or have it "wake up" another device when the amp is activated.
Note: The front panel power button is inoperative when the 12V Trigger or Audio Sense power modes are selected.


Global Inputs and Loop Outputs
From single source with volume controls (Global A/B) to independent sources at each room (Direct) – or any combination in between – this amplifier has the flexibility you need. Global A/B provides two independent global sources that can be mapped to desired channel pairs. When using a stack of amplifiers, the loop outputs are a convenient way to daisy-chain the signal to downstream components. This eliminates the need for RCA splitters and gives a much cleaner (and faster) install.


Bridgeable Speaker Outputs
For larger speakers or high-power applications, bridgeable channels allow you to combine any 2 channels into a single 140W channel. For example, run 2 "standard" zones of audio plus one high power zone. Or use this amplifier as the ultimate bi-amping solution for two-channel applications with 4 bridged channels!
 
Gain Controls
The EA-AMP-8D-70A offers gain adjustments for each channel pair, allowing you to independently trim output levels in each zone whether using the global or line level inputs. In volume control-based systems, these may be used to prevent harmful clipping that could cause damage to the amplifier or speakers.
 

Built-In ESD and Surge Protection
Multi-room AV environments can be tough on an amplifier. Each speaker run acts like an antenna, so all kinds of nasty things can happen when the weather changes. That’s why we engineered this amp with surge protection components that exceed CE Level 3 standards. During development, every connection was tortured using both an ESD and lightning simulator – all speaker outputs, RCA connectors even the power input have been surged ESD tested with up to 15,000V and Surge tested at 2,400V. Most importantly, though, they each lived to tell about it.


Grounds for Improvement
If you’ve ever experience hum from your speakers or noise on your TV, odds are it was due to system grounding. This amplifier was engineered for not only the best surge protection but also with an isolated common ground for the audio circuits. The result is a great sounding, and reliable system that your customer will enjoy for years.

 

What is GEMtech™? 
Green Energy Management technology is a stringent product design criteria established by SnapAV that focuses on energy savings through active energy management circuitry. Specifics on certified products and GEMtech™ performance standards are available on our web site here.

Installation Flexibility
A slim 2U chassis takes up less space when stacked on a shelf or installed in a rack. Included removable rack ears and amplifier feet give you the flexibility to install it where you need.

Product Package Includes:
(1) Amplifier
(1) Detachable IEC Power Cable
(4) Removable Rack Feet and Screws
(2) Rack Mounting Ears and Screws
(4) 5mm 4-pin Screw Terminals
(1) Installation Manual

Audio-Sensing and 12V Trigger Turn-On Three convenient turn-on modes make it easy to integrate with simple volume controls or sophisticated control systems. Audio-sense is perfect for Sonos or Apple Airplay multi-room audio – when the last source shuts down, the amplifier will gracefully go into a power-saving standby mode. The 12V trigger inputs and outputs allow you to use a preamp or control system to turn the amp on or off, or have it "wake up" another device when the amp is activated.
Note: The front panel power button is inoperative when the 12V Trigger or Audio Sense power modes are selected.

Global Inputs and Loop Outputs
From single source with volume controls (Global A/B) to independent sources at each room (Direct) – or any combination in between – this amplifier has the flexibility you need. Global A/B provides two independent global sources that can be mapped to desired channel pairs. When using a stack of amplifiers, the loop outputs are a convenient way to daisy-chain the signal to downstream components. This eliminates the need for RCA splitters and gives a much cleaner (and faster) install.

Bridgeable Speaker Outputs
For larger speakers or high-power applications, bridgeable channels allow you to combine any 2 channels into a single 140W channel. For example, run 2 "standard" zones of audio plus one high power zone. Or use this amplifier as the ultimate bi-amping solution for two-channel applications with 4 bridged channels!
 
Gain Controls
The EA-AMP-8D-70A offers gain adjustments for each channel pair, allowing you to independently trim output levels in each zone whether using the global or line level inputs. In volume control-based systems, these may be used to prevent harmful clipping that could cause damage to the amplifier or speakers.
 

Built-In ESD and Surge Protection
Multi-room AV environments can be tough on an amplifier. Each speaker run acts like an antenna, so all kinds of nasty things can happen when the weather changes. That’s why we engineered this amp with surge protection components that exceed CE Level 3 standards. During development, every connection was tortured using both an ESD and lightning simulator – all speaker outputs, RCA connectors even the power input have been surged ESD tested with up to 15,000V and Surge tested at 2,400V. Most importantly, though, they each lived to tell about it.

Grounds for Improvement
If you’ve ever experience hum from your speakers or noise on your TV, odds are it was due to system grounding. This amplifier was engineered for not only the best surge protection but also with an isolated common ground for the audio circuits. The result is a great sounding, and reliable system that your customer will enjoy for years.

 

What is GEMtech™? 
Green Energy Management technology is a stringent product design criteria established by SnapAV that focuses on energy savings through active energy management circuitry. Specifics on certified products and GEMtech™ performance standards are available on our web site here.

Audio-Sensing and 12V Trigger Turn-On Three convenient turn-on modes make it easy to integrate with simple volume controls or sophisticated control systems. Audio-sense is perfect for Sonos or Apple Airplay multi-room audio – when the last source shuts down, the amplifier will gracefully go into a power-saving standby mode. The 12V trigger inputs and outputs allow you to use a preamp or control system to turn the amp on or off, or have it "wake up" another device when the amp is activated.
Note: The front panel power button is inoperative when the 12V Trigger or Audio Sense power modes are selected.

Global Inputs and Loop Outputs
From single source with volume controls (Global A/B) to independent sources at each room (Direct) – or any combination in between – this amplifier has the flexibility you need. Global A/B provides two independent global sources that can be mapped to desired channel pairs. When using a stack of amplifiers, the loop outputs are a convenient way to daisy-chain the signal to downstream components. This eliminates the need for RCA splitters and gives a much cleaner (and faster) install.

Bridgeable Speaker Outputs
For larger speakers or high-power applications, bridgeable channels allow you to combine any 2 channels into a single 140W channel. For example, run 2 "standard" zones of audio plus one high power zone. Or use this amplifier as the ultimate bi-amping solution for two-channel applications with 4 bridged channels!
 
Gain Controls
The EA-AMP-8D-70A offers gain adjustments for each channel pair, allowing you to independently trim output levels in each zone whether using the global or line level inputs. In volume control-based systems, these may be used to prevent harmful clipping that could cause damage to the amplifier or speakers.
 

Built-In ESD and Surge Protection
Multi-room AV environments can be tough on an amplifier. Each speaker run acts like an antenna, so all kinds of nasty things can happen when the weather changes. That’s why we engineered this amp with surge protection components that exceed CE Level 3 standards. During development, every connection was tortured using both an ESD and lightning simulator – all speaker outputs, RCA connectors even the power input have been surged ESD tested with up to 15,000V and Surge tested at 2,400V. Most importantly, though, they each lived to tell about it.

Grounds for Improvement
If you’ve ever experience hum from your speakers or noise on your TV, odds are it was due to system grounding. This amplifier was engineered for not only the best surge protection but also with an isolated common ground for the audio circuits. The result is a great sounding, and reliable system that your customer will enjoy for years.

 

What is GEMtech™? 
Green Energy Management technology is a stringent product design criteria established by SnapAV that focuses on energy savings through active energy management circuitry. Specifics on certified products and GEMtech™ performance standards are available on our web site here.

Audio-Sensing and 12V Trigger Turn-On Three convenient turn-on modes make it easy to integrate with simple volume controls or sophisticated control systems. Audio-sense is perfect for Sonos or Apple Airplay multi-room audio – when the last source shuts down, the amplifier will gracefully go into a power-saving standby mode. The 12V trigger inputs and outputs allow you to use a preamp or control system to turn the amp on or off, or have it "wake up" another device when the amp is activated.
Note: The front panel power button is inoperative when the 12V Trigger or Audio Sense power modes are selected.

Global Inputs and Loop Outputs
From single source with volume controls (Global A/B) to independent sources at each room (Direct) – or any combination in between – this amplifier has the flexibility you need. Global A/B provides two independent global sources that can be mapped to desired channel pairs. When using a stack of amplifiers, the loop outputs are a convenient way to daisy-chain the signal to downstream components. This eliminates the need for RCA splitters and gives a much cleaner (and faster) install.

Bridgeable Speaker Outputs
For larger speakers or high-power applications, bridgeable channels allow you to combine any 2 channels into a single 140W channel. For example, run 2 "standard" zones of audio plus one high power zone. Or use this amplifier as the ultimate bi-amping solution for two-channel applications with 4 bridged channels!
 
Gain Controls
The EA-AMP-8D-70A offers gain adjustments for each channel pair, allowing you to independently trim output levels in each zone whether using the global or line level inputs. In volume control-based systems, these may be used to prevent harmful clipping that could cause damage to the amplifier or speakers.
 

Built-In ESD and Surge Protection
Multi-room AV environments can be tough on an amplifier. Each speaker run acts like an antenna, so all kinds of nasty things can happen when the weather changes. That’s why we engineered this amp with surge protection components that exceed CE Level 3 standards. During development, every connection was tortured using both an ESD and lightning simulator – all speaker outputs, RCA connectors even the power input have been surged ESD tested with up to 15,000V and Surge tested at 2,400V. Most importantly, though, they each lived to tell about it.

Grounds for Improvement
If you’ve ever experience hum from your speakers or noise on your TV, odds are it was due to system grounding. This amplifier was engineered for not only the best surge protection but also with an isolated common ground for the audio circuits. The result is a great sounding, and reliable system that your customer will enjoy for years.

 

What is GEMtech™? 
Green Energy Management technology is a stringent product design criteria established by SnapAV that focuses on energy savings through active energy management circuitry. Specifics on certified products and GEMtech™ performance standards are available on our web site here.

Audio-Sensing and 12V Trigger Turn-On Three convenient turn-on modes make it easy to integrate with simple volume controls or sophisticated control systems. Audio-sense is perfect for Sonos or Apple Airplay multi-room audio – when the last source shuts down, the amplifier will gracefully go into a power-saving standby mode. The 12V trigger inputs and outputs allow you to use a preamp or control system to turn the amp on or off, or have it "wake up" another device when the amp is activated.
Note: The front panel power button is inoperative when the 12V Trigger or Audio Sense power modes are selected.

Global Inputs and Loop Outputs
From single source with volume controls (Global A/B) to independent sources at each room (Direct) – or any combination in between – this amplifier has the flexibility you need. Global A/B provides two independent global sources that can be mapped to desired channel pairs. When using a stack of amplifiers, the loop outputs are a convenient way to daisy-chain the signal to downstream components. This eliminates the need for RCA splitters and gives a much cleaner (and faster) install.

Bridgeable Speaker Outputs
For larger speakers or high-power applications, bridgeable channels allow you to combine any 2 channels into a single 140W channel. For example, run 2 "standard" zones of audio plus one high power zone. Or use this amplifier as the ultimate bi-amping solution for two-channel applications with 4 bridged channels!
 
Gain Controls
The EA-AMP-8D-70A offers gain adjustments for each channel pair, allowing you to independently trim output levels in each zone whether using the global or line level inputs. In volume control-based systems, these may be used to prevent harmful clipping that could cause damage to the amplifier or speakers.
 

Built-In ESD and Surge Protection
Multi-room AV environments can be tough on an amplifier. Each speaker run acts like an antenna, so all kinds of nasty things can happen when the weather changes. That’s why we engineered this amp with surge protection components that exceed CE Level 3 standards. During development, every connection was tortured using both an ESD and lightning simulator – all speaker outputs, RCA connectors even the power input have been surged ESD tested with up to 15,000V and Surge tested at 2,400V. Most importantly, though, they each lived to tell about it.

Grounds for Improvement
If you’ve ever experience hum from your speakers or noise on your TV, odds are it was due to system grounding. This amplifier was engineered for not only the best surge protection but also with an isolated common ground for the audio circuits. The result is a great sounding, and reliable system that your customer will enjoy for years.

 

What is GEMtech™? 
Green Energy Management technology is a stringent product design criteria established by SnapAV that focuses on energy savings through active energy management circuitry. Specifics on certified products and GEMtech™ performance standards are available on our web site here.

Audio-Sensing and 12V Trigger Turn-On Three convenient turn-on modes make it easy to integrate with simple volume controls or sophisticated control systems. Audio-sense is perfect for Sonos or Apple Airplay multi-room audio – when the last source shuts down, the amplifier will gracefully go into a power-saving standby mode. The 12V trigger inputs and outputs allow you to use a preamp or control system to turn the amp on or off, or have it "wake up" another device when the amp is activated.
Note: The front panel power button is inoperative when the 12V Trigger or Audio Sense power modes are selected.

Global Inputs and Loop Outputs
From single source with volume controls (Global A/B) to independent sources at each room (Direct) – or any combination in between – this amplifier has the flexibility you need. Global A/B provides two independent global sources that can be mapped to desired channel pairs. When using a stack of amplifiers, the loop outputs are a convenient way to daisy-chain the signal to downstream components. This eliminates the need for RCA splitters and gives a much cleaner (and faster) install.

Bridgeable Speaker Outputs
For larger speakers or high-power applications, bridgeable channels allow you to combine any 2 channels into a single 140W channel. For example, run 2 "standard" zones of audio plus one high power zone. Or use this amplifier as the ultimate bi-amping solution for two-channel applications with 4 bridged channels!
 
Gain Controls
The EA-AMP-8D-70A offers gain adjustments for each channel pair, allowing you to independently trim output levels in each zone whether using the global or line level inputs. In volume control-based systems, these may be used to prevent harmful clipping that could cause damage to the amplifier or speakers.
 

Built-In ESD and Surge Protection
Multi-room AV environments can be tough on an amplifier. Each speaker run acts like an antenna, so all kinds of nasty things can happen when the weather changes. That’s why we engineered this amp with surge protection components that exceed CE Level 3 standards. During development, every connection was tortured using both an ESD and lightning simulator – all speaker outputs, RCA connectors even the power input have been surged ESD tested with up to 15,000V and Surge tested at 2,400V. Most importantly, though, they each lived to tell about it.

Grounds for Improvement
If you’ve ever experience hum from your speakers or noise on your TV, odds are it was due to system grounding. This amplifier was engineered for not only the best surge protection but also with an isolated common ground for the audio circuits. The result is a great sounding, and reliable system that your customer will enjoy for years.

 

What is GEMtech™? 
Green Energy Management technology is a stringent product design criteria established by SnapAV that focuses on energy savings through active energy management circuitry. Specifics on certified products and GEMtech™ performance standards are available on our web site here.

Audio-Sensing and 12V Trigger Turn-On Three convenient turn-on modes make it easy to integrate with simple volume controls or sophisticated control systems. Audio-sense is perfect for Sonos or Apple Airplay multi-room audio – when the last source shuts down, the amplifier will gracefully go into a power-saving standby mode. The 12V trigger inputs and outputs allow you to use a preamp or control system to turn the amp on or off, or have it "wake up" another device when the amp is activated.
Note: The front panel power button is inoperative when the 12V Trigger or Audio Sense power modes are selected.

Global Inputs and Loop Outputs
From single source with volume controls (Global A/B) to independent sources at each room (Direct) – or any combination in between – this amplifier has the flexibility you need. Global A/B provides two independent global sources that can be mapped to desired channel pairs. When using a stack of amplifiers, the loop outputs are a convenient way to daisy-chain the signal to downstream components. This eliminates the need for RCA splitters and gives a much cleaner (and faster) install.

Bridgeable Speaker Outputs
For larger speakers or high-power applications, bridgeable channels allow you to combine any 2 channels into a single 140W channel. For example, run 2 "standard" zones of audio plus one high power zone. Or use this amplifier as the ultimate bi-amping solution for two-channel applications with 4 bridged channels!
 
Gain Controls
The EA-AMP-8D-70A offers gain adjustments for each channel pair, allowing you to independently trim output levels in each zone whether using the global or line level inputs. In volume control-based systems, these may be used to prevent harmful clipping that could cause damage to the amplifier or speakers.
 

Built-In ESD and Surge Protection
Multi-room AV environments can be tough on an amplifier. Each speaker run acts like an antenna, so all kinds of nasty things can happen when the weather changes. That’s why we engineered this amp with surge protection components that exceed CE Level 3 standards. During development, every connection was tortured using both an ESD and lightning simulator – all speaker outputs, RCA connectors even the power input have been surged ESD tested with up to 15,000V and Surge tested at 2,400V. Most importantly, though, they each lived to tell about it.

Grounds for Improvement
If you’ve ever experience hum from your speakers or noise on your TV, odds are it was due to system grounding. This amplifier was engineered for not only the best surge protection but also with an isolated common ground for the audio circuits. The result is a great sounding, and reliable system that your customer will enjoy for years.

 

What is GEMtech™? 
Green Energy Management technology is a stringent product design criteria established by SnapAV that focuses on energy savings through active energy management circuitry. Specifics on certified products and GEMtech™ performance standards are available on our web site here.

Audio-Sensing and 12V Trigger Turn-On Three convenient turn-on modes make it easy to integrate with simple volume controls or sophisticated control systems. Audio-sense is perfect for Sonos or Apple Airplay multi-room audio – when the last source shuts down, the amplifier will gracefully go into a power-saving standby mode. The 12V trigger inputs and outputs allow you to use a preamp or control system to turn the amp on or off, or have it "wake up" another device when the amp is activated.
Note: The front panel power button is inoperative when the 12V Trigger or Audio Sense power modes are selected.

Global Inputs and Loop Outputs
From single source with volume controls (Global A/B) to independent sources at each room (Direct) – or any combination in between – this amplifier has the flexibility you need. Global A/B provides two independent global sources that can be mapped to desired channel pairs. When using a stack of amplifiers, the loop outputs are a convenient way to daisy-chain the signal to downstream components. This eliminates the need for RCA splitters and gives a much cleaner (and faster) install.

Bridgeable Speaker Outputs
For larger speakers or high-power applications, bridgeable channels allow you to combine any 2 channels into a single 140W channel. For example, run 2 "standard" zones of audio plus one high power zone. Or use this amplifier as the ultimate bi-amping solution for two-channel applications with 4 bridged channels!
 
Gain Controls
The EA-AMP-8D-70A offers gain adjustments for each channel pair, allowing you to independently trim output levels in each zone whether using the global or line level inputs. In volume control-based systems, these may be used to prevent harmful clipping that could cause damage to the amplifier or speakers.
 

Built-In ESD and Surge Protection
Multi-room AV environments can be tough on an amplifier. Each speaker run acts like an antenna, so all kinds of nasty things can happen when the weather changes. That’s why we engineered this amp with surge protection components that exceed CE Level 3 standards. During development, every connection was tortured using both an ESD and lightning simulator – all speaker outputs, RCA connectors even the power input have been surged ESD tested with up to 15,000V and Surge tested at 2,400V. Most importantly, though, they each lived to tell about it.

Grounds for Improvement
If you’ve ever experience hum from your speakers or noise on your TV, odds are it was due to system grounding. This amplifier was engineered for not only the best surge protection but also with an isolated common ground for the audio circuits. The result is a great sounding, and reliable system that your customer will enjoy for years.

 

What is GEMtech™? 
Green Energy Management technology is a stringent product design criteria established by SnapAV that focuses on energy savings through active energy management circuitry. Specifics on certified products and GEMtech™ performance standards are available on our web site here.
Specifications
Power Rating
(Watts / Channel)
70 Watts / Channel / 4 Ohms
50 Watts / Channel / 8 Ohms
Number of Channels 8
Construction Digital, Class D
Dimensions Width: 17” Height: 4” Depth: 13”
Rack Spacing 2U
Weight 25
Ratings / Certifications ETL 2000772, CE, FCC Part 15
Power Consumption (G.E.M, Energy Star) 800W (GEM)
Operating Voltage 115-230VAC, 50/60Hz, 800W

2-Year Limited Warranty
This Episode® Amplifier has a 2-Year Limited Warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products which have been abused, modified or disassembled. Products to be repaired under this warranty must be returned to SnapAV or a designated service center with prior notification and an assigned return authorization number (RA).

 Download the Operations Manual

 Download the Specifications

You may also be interested in
Rotary Volume Control - 100 Watt