AVENVIEW - H264 HDMI OVER IP TRANSMITTER WITH SEAMLESS SWITCHING & VIDEOWALL (480P TO 4K@60 SUPPORT)
Press and move to zoom.
Mouse over image to zoom.

AVENVIEW - H264 HDMI OVER IP TRANSMITTER WITH SEAMLESS SWITCHING & VIDEOWALL (480P TO 4K@60 SUPPORT)

Item Code : HDM-C6MWIP4K-S

Stock Status : 5
  • Availability: In stock
AVENVIEW HDMI TRANSMITTER/ENCODER, HDMI, 1 X CAT5/6, 1 X HDMI, H.264/MPEG-4 AVC, AUDIO JACK, STEREO, 12 V, 1 A DC

The Avenview HDM-C6MWIP4K-SET - HDMI H.264 IP Videowall and Matrix 4K Decoder/Encoder - delivers end-to-end streaming media over IP networks. The HDM-C6MWIP4K-SET is composed of two units: an Encoder and a Decoder. The Avenview M-Series 4K encoder (the HDM-C6MWIP4K-S) is an HDCP compliant device that provides H.264 encoding to distribute your UHD media across your entire network, delivering high quality and low bandwidth networked video. The 4K Decoder (HDM-C6MWIP4K-R) receives the encoded H.264/MPEG-4 AVC video compression format IP signal through the LAN port and decodes video/audio signal out through the HDMI interface. It also supports Videowall and Matrix functions, stereo de-embedding and streaming resolutions up to 4K at 60 hz.

FEATURES

  • Point to Point - (Direct Connection with CAT5/6) - 330ft.
  • Point to Multi - point with CAT5/6 requires a POE Network Switch which supports port based, IGMP v2.0 or above protocol. For large application, we would recommend Huawei switch models S5720-28X-PWR-SI-AC, S5720-28X-PWR-SI-DC, S5720-52X-PWR-SI-ACF.
  • Videowall and Matrix Function - with CAT 5/6 cable without any signal loss add multiple Sources to multiple encoders which links via LAN by cascading any POE Gigabit Ethernet switches up to 3 levels, to the decoder connected to the HD Monitors at different locations on the Network. Transporting full 4K video and internally H.264 video compression adapts to available network bandwidth if needed while retaining vivid picture with PCM audio.
  • DMI 2.0, HDCP compliant
  • Flexible PC,WEB GUI iPad control;
  • Built in-auto scaler;
  • Supports POE;
  • Encoder supports- video stream encoding 480p at 60 Hz to 3840 x 2160 at 30;
  • Decoder supports - video stream decoding 480p at 60 Hz to 3840 x 2160 at 60;
  • Allows video previewing via iPad App and Windows 7/8/10 software 352x288 at 5Hz;
  • Supports multiple interfaces HDMI, DVI signals over IP networks;
  • Supports audio embedding and de-embedding;
  • Supports H.264 features baseline profile, main profile and high profile;
  • Supports H.264, TCP/IP, Telnet, UDP and IGMP;
  • Support Telnet, WEB GUI control and 3rd Party control sytems API commands;
  • Supports Auto IP, Zero-configuration networking (zeroconf)
  • Seamless switching, no black screen, no frame lock. (Industry standard<500ms)
  • Configurable encoding bit rate up to 20 Mbps
  • Auto input format detection
  • CEC Function on the RX;
  • Compatible with other Avenview IP products like the HDM-C6MWIP-SET, HDM-C6MWIPL-R and HDM-C6MVIP-R (1080p only)
  • Capable of upscaling 1080p at 60 Hz content to 4K at 60 Hz.
HDM-C6MWIP4K-S
Input Video Port HDMI
Supported Resolutions HDMI 640 x 480 at 60 hz Up to 3840 x 2160 at 60 hz, DVI Up to 1920 x 1200 at 60 hz, VGA Up to 1920 x 1200 at 60 hz, YPbPr Up to 1920 x 1080i at 60 hz, CVBS Up to 576i at 50 hz
Video Output 1 x CAT5/6, 1 x HDMI, H.264/MPEG-4 AVC
Output Video Resolution HDMI 640 x 480 at 60 hz Up to 3840 x 2160 at 60 hz, DVI Up to 1920 x 1200 at 60 hz, VGA Up to 1920 x 1200 at 60 hz, YPbPr Up to 1920 x 1080i at 60 hz, CVBS Up to 576i at 50 hz
Video Impedance 100 ohm
End-To-End Latency 60 - 90 ms (Low Latency Mode), 250 - 300 ms (High Quality Mode), 1080P Signals
Input Audio Ports Audio Jack
Input Audio Format Stereo
Output Audio Ports Phoenix Connector
Output Audio Format Stereo
Control Type Rear Panel CAT5/6 Port, PC Configurator and RS-232
Power Supply 12 V, 1 A DC
Operating Temperature 32 - 104 deg F
Environmental Conditions 20 - 90% RH (No Condensation), -4 to 140 deg F Storage Temperature
File Download(s): Cut Sheet | Installation Instruction |