ATLONA - 4K / UHD 100M HDBASET TRANSMITTER WITH ETHERNET AND CONTROL
Press and move to zoom.
Mouse over image to zoom.

ATLONA - 4K / UHD 100M HDBASET TRANSMITTER WITH ETHERNET AND CONTROL

Item Code : AT-UHD-EX-100CE-TX

Stock Status : 4
  • Availability: In stock

ATLONA - 4K/UHD 100M HDBASET TRANSMITTER WITH ETHERNET AND CONTROL

4K/UHD HDMI Over 100M HDBaseT TX/RX with Control and PoE

The Atlona AT-UHD-EX-100CE-TX is an HDBaseT™ transmitter for HDMI transmission up to 328 feet (100 meters) over category cable with Ethernet pass through, plus RS-232 and IR control. Designed to work with HDBaseT inputs on switchers and projectors, this extender transmits video signals up to 4K/UHD @ 60Hz with embedded multi-channel audio. Additionally, the transmitter extends Ethernet, RS-232, and 12 volt-based IR control commands. The AT-UHD-EX-100CE-TX is HDCP 2.2 compliant and supports EDID communication. The transmitter features a quarter rack width metal enclosure for easy rack mounting with rear panel I/O ports for uncluttered wire management. This PSE (Power Sourcing Equipment) device is externally powered, includes a desktop power supply and provides Power over Ethernet for compatible receiving devices. The AT-UHD-EX-100CE-TX is certified by the HDBaseT Alliance.

Ethernet-Enabled HDBaseT Transmitter for Projectors

This HDBaseT Class A transmitter is designed to support the growing number of displays and video projectors in the commercial market with HDBaseT inputs. The AT-UHD-EX-100CE-TX provides extended distance, transmission of uncompressed, 4K/UHD HDMI signals from switchers and matrixes. Other applications include remote input signal transmission for the AT-UHD-CLSO-824 matrix switcher. Built-in Ethernet and bi-directional control signal extension eliminates the need for additional cabling from switcher to the display or remote input device. Installer-friendly features include: a rack-mountable form factor that allows four transmitters to share a single, 1U rack tray; power chaining to allow multiple sets to be powered from one power supply; and a front mounted USB port for easy firmware updates.

The AT-UHD-EX-100CE-TX is ideal for use in commercial point to point applications that require extended distance HDMI signal transmission to HDBaseT-equipped displays. The transmitter can be used with any 4K/UHD switcher, matrix switcher, or distribution amplifier. Multiple points of control allow the transmitter to work with a variety of third-party control systems to cost-effectively extend control signals within a system.

Configured and Managed by AMS

The AT-UHD-EX-100CE-TX also supports the Atlona Management System (AMS), a powerful network software platform that integrates product configuration, management and updating. Specially designed for IP-controllable Atlona Products, the Atlona Management System reduces installation time and enables remote monitoring and support.

FEATURES

4K/UHD capability

  • Compatible with Ultra High Definition sources and displays
  • Full support of 4K/UHD streaming services and playback devices

HDCP 2.2 compliant

  • Adheres to latest specification for High-bandwidth Digital Content Protection
  • Allows protected content stream to pass between devices

PSE – Power Sourcing Equipment

  • Uses external power supply (included)
  • Eliminates the need for remote power or power-injection devices
AV, Ethernet, power, and control over HDBaseT

  • Delivers 4K/UHD video, audio, 100Base-T Ethernet, power, and control through a single cable
  • Eliminates multiple cable runs between source, control system, router, and display

Extended distance HDMI extension

  • Transmits HDMI signals up to 328 ft (100m) @ 1080P and 328 ft (100m) @ 4K/UHD using CAT6a/7 cable
  • Uses easy to integrate category cable for low-cost, reliable system installation

Rear panel I/O connectors

  • Placement of ports on rear panel simplifies wire management
  • Saves installation time and eliminates clutter

Multi-channel audio compliant

  • Supports PCM, Dolby® Digital, Dolby Digital Plus™, Dolby TrueHD, Dolby Atmos®, DTS Digital Surround™, DTS-HD Master Audio™, DTS:X™
  • Allows any multi-channel audio stream to be used within a professional audio system

Field updatable firmware

  • Front panel USB port provides an easy means for kit upgrades
  • Ensures long term system return on investment

Front panel Power and Link status LEDs

  • LED indicators provide power and HDBaseT link status information
  • Provides easy setup and troubleshooting

Low-profile, 1 inch (2.5cm) high quarter rack-width enclosure

  • Easy installation into racks and confined spaces behind displays
  • Keeps devices out-of-sight when placed in public spaces

Included accessories

  • User guide, desktop power supply for transmitter, detachable power cable, IR emitter P/N AT-IR-CS-TX, mounting brackets

SPECIFICATIONS

Resolution
Video 4096×2160@24/25/30/50*/60Hz*, 3840×2160@24/25/30/50*/60Hz*, 2048x1080p, 1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480i
VESA 2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600, 640×480
Colorspace YCbCr, RGB
Chroma Subsampling 4:4:4, 4:2:2, 4:2:0
Color Depth 8-bit, 10-bit, 12-bit
Audio
Formats PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby Digital, DTS 5.1, Dolby Digital+, Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X
Sample Rate 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
Bit Rate up to 24-bit
Distance
CAT5e/6 @ 4K up to 70 meters
CAT6a/7 @ 4K up to 100 meters
CAT5e/6 @ 1080p up to 100 meters
HDMI IN/OUT @ 4K up to 5 meters
HDMI IN/OUT @ 1080p up to 10 meters
Signal
Bandwidth 10.2 Gbps
CEC Pass through
HDCP Supports up to 2.2
Connector
Firmware Mini-B USB
HDBaseT RJ45 (8P8C)
HDMI Type A
LAN RJ45 (8P8C), Ethernet pass through
TX-IR 4-pin captive screw
RS-232 3-pin captive screw
Power 2-pin, 48V captive screw
Temperature
Operating 0°C to 50°C
Storage -20°C to 60°C
Humidity 20 to 90% non-condensing
Power
Consumption 12W (when paired with RX)
Supply Input: AC100~240V 50/60Hz
Output: DC 48V/0.83A
Dimension
H x W x D 25 x 109 x 89 (mm)
w/ears 27 x 119 x 89 (mm)
Weight
Unit 0.39kg
Certification
Power Supply CE, FCC, RoHS, cULus, RCM, CCC
Product CE, FCC
File Download(s): Manual | Datasheet