Search
Products
    Menu Close

    EPISODE - SIGNATURE RETROFIT IN-WALL SUBWOOFER ENCLOSURE - SINGLE 8 IN.

    Manufacturer: Picture for manufacturer Episode Speakers - Signature
    EPISODE - SIGNATURE RETROFIT IN-WALL SUBWOOFER ENCLOSURE - SINGLE 8 IN.
    SKU: ESS-SUB-ENC-RET-SGL8
    Availability:
    Richmond : 0
    Special Order

    Mississauga : 0
    Special Order
    Call for pricing

    Episode® Signature Retrofit In-Wall Subwoofer Enclosure - Single 8"

    The Episode Signature Retrofit In-Wall Subwoofer Enclosure increases sound performance by adding consistent air volume. The retrofit enclosure is capable of housing a single subwoofer in the wall, or you can also add a second enclosure either vertically or horizontally for the perfect dual subwoofer configuration. Plus, the design allows you to install an architectural subwoofer after the sheetrock is added, while still getting defined air volume. This enclosure has a minimal footprint, so you can easily hide subwoofers anywhere – small or large rooms, theatres, distributed audio, and more.

    Installation - Be sure to align the dog ear screw with the marking on the back box. If this is not done, the dog will jam against the side wall of the enclosure and can become difficult to remove.
    Compatibility - This enclosure is compatible with Episode Signature Passive Free Air Subwoofer. It must be purchased separately.
    Increased Performance

    This Episode Signature Retrofit Enclosure gives a subwoofer a defined air volume for more consistent audio performance. Plus, adding a subwoofer is known to improve a customer’s overall satisfaction with their sound system.

    Pre-Wired

    This enclosure is pre-wired for use with an Episode Signature Free Air Subwoofer.

    Professional Design

    This enclosure has built-in dog ears and provisions for joint fasteners in a sturdy metal-front baffle frame. Vinyl-wrapped MDF enclosure reduces both resonance of the subwoofer and noise transmission to adjacent rooms. The included foam pads also eliminate resonance. Dog ears are included, with the option to screw to studs from the frame. Simply place the subwoofer in the enclosure and engage the dog ears. Be sure to align the dog ear screw with the area marked on the front of the enclosure.

    Discreet Solution

    The thin design of this enclosure makes it perfect for under couches or beds. It can be laid flat to hide discreetly under furniture.

    Easy Wiring

    The terminal cup on the outside of the enclosure and the internal pigtail wire allow for easy wiring and install of the subwoofer after sheetrock is added.

    Thin-Bezel Design

    Magnetic, one-step paintable grille keeps the speaker out of sight for a smooth, minimalistic finish. High-strength neo-magnets around the perimeter hold the grille securely in place, but still allow you to remove it easily when needed. You can also purchase a Thin-Bezel Grille Kit in white or black to bring a uniform look to multiple (2) retrofit enclosures.

    Wall Accommodation

    This enclosure hides in a standard 2 x 4" stud bay for a flush install that won’t take up valuable space. You can install two back boxes either vertically or horizontally, spanning across two stud bays without needing to cut the stud.

    FEATURES

    • Retrofit enclosure for use with passive single 8" free air subwoofer
    • Thin bezel magnetic grille included

    SPECIFICATIONS

      ESS-SUB-ENC-RET-SGL8
    Connector Type Gold-Plated PushTerminals
    Frequency Response Down to 22 Hz
    Features Grille: Steel Micro-Perf Mesh /White / low profile thin bezel Included; Optional ESS-GRL-DSUB8-RET-WT and ESS-GRL-DSUB8-RET-BLK for dual retrofit subwoofer installations.
    Thickness 5/8" (Enclosure Material Wall Thickness)
    Dimensions (W x H x D) 14" × 14" × 4.25"
    Mounting Depth 3.88"
    Cutout Diameter 12" × 12"
    Weight 10.4 lb
    *
    *
    *
    Products specifications
    Accessory Type Enclosure
    Product tags
    • (6039)