Search
Products
    Menu Close

    CROWN - FOUR-CHANNEL 300W AT 4OHM ANALOG POWER AMPLIFIER 70V/100V

    CROWN - FOUR-CHANNEL 300W AT 4OHM ANALOG POWER AMPLIFIER 70V/100V
    SKU: DCI4300
    Availability: Special Order

    CROWN - FOUR-CHANNEL 300W AT 4OHM ANALOG POWER AMPLIFIER 70V/100V

    The new DriveCore™ Install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi Series amplifiers are designed, engineered and manufactured to the industry’s highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications. Versatile, compact and highly energy-efficient, DCi Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology.

    FEATURES

    • TRUE RACK DENSITY – Power points of 300W or 600W in 2-/4-/8-channel configurations – all in a 2 Rack Unit form factor. More channels in one box allow smaller infrastructure rooms that can reduce operational costs while giving you the utmost in installation flexibility.
    • DIRECT DRIVE CONSTANT VOLTAGE – Save money by using smaller gauge wiring to drive the speakers using either 70V rms or 100Vrms. With no need for a step-up transformer at the output, the DCi produces higher audio quality much more efficiently. 
    • CHANNEL INDEPENDENT HI-Z/LOW-Z SELECTION – Drive either one or two speakers in low-Z mode, or literally hundreds of speakers in high-Z mode (70Vrms or 100Vrms). This means better design flexibility since DCi powers all loads on a channel-by-channel basis.
    • BRIDGEABLE CHANNEL PAIRS – Unlike amps from other manufacturers, the DCi Series channels are bridgeable – even in 100Vrms mode – which means even more adaptability for higher power applications such as subwoofers.
    • REMOTE ON/OFF INTERFACE – Save power by integrating the amplifier into a control system so you can easily turn it on and off.
    • EFFICIENT COOLING DESIGN – Highly efficient internal cooling fans provide airflow to the most heat-generating parts. Incorporating the fans into the amplifier brick design maximizes cooling while minimizing wasted energy and noise.
    • ADVANCED POWER FACTOR CORRECTION (PFC) UNIVERSAL POWER SUPPLY – The most advanced power supply in an installation amplifier delivers power more efficiently in almost any condition than anyone else, resulting in less power dissipated and less heat in your racks.

    SPECIFICATIONS

    DCI4300
    Frequency Response (8Ω, 20Hz - 20kHz) ±0.25dB
    Signal To Noise Ratio (A-weighted) >108dB
    Total Harmonic Distortion (at full rated power, 20Hz - 20kHz) 0.35%
    Voltage Gain 34dB
    Damping Factor (20Hz to 100Hz) >1000
    Input Impedance (nominal balanced, unbalanced) 10kΩ, 5kΩ
    Maximum Input Level before Compression +20dBu
    Maximum Input Level before Clipping +26dBu
    Load Impedance (Stereo/Dual Mode) 2Ω - 16Ω; 70Vrms and 100Vrms
    Load Impedance Bridge Mono 4Ω - 16Ω; 140Vrms and 200Vrms
    Cooling Continuously variable speed forced air, front to back airflow
    Maximum Fan Noise (re dBA SPL @ 1M) 45
    Required AC Mains (±10%) 100V-240V ~ 50/60Hz
    Power Connector 15A IEC
    Dimensions 19" x 3.5" x 14.25" (48.3cm x 8.9cm x 35.63cm)
    Weight 20.1lbs (9.12kg)

    SUPPORT

    File Download(s): Data Sheet |
    *
    *
    *
    Products specifications
    Channels 4
    Type Amplifiers