Search
Products
    Menu Close

    CROWN - ANALOG INPUT, 2 CHANNEL, 600W PER OUTPUT CHANNEL

    CROWN - ANALOG INPUT, 2 CHANNEL, 600W PER OUTPUT CHANNEL
    SKU: CDI-2-600
    Availability: Special Order

    HARMAN CROWNR CDI DRIVECORETM SERIES 600 AUDIO POWER AMPLIFIER, 2 CHANNEL, 20 HZ - 20 KHZ (+/-0.5 DB, 8 OHM), 34 DB, LCD DISPLAY, 2U

    The CDi drivecore series is an evolution in amplification, providing an impressive mix of high-performance; rich feature set and competitive cost. Using technology derived from our flagship installed Sound amplifier (crown drivecore install series), the CDi drivecore 2-600 offers streamlined functionality to work in almost any medium sized installation such as cinema, houses of worship, bars, lounges and more. Designed for ease-of-use in a variety of applications, the 2-600 is a 2-channel amp that includes network control/monitoring, high-level DSP, front-panel interface and support for driving up to 100vrms speaker loads without requiring a transformer. The entire CDi drivecore line comes pre-loaded with JBL speaker tunings to help make installations quicker and easier.

    FEATURES

    Drivecore technology- crown's proprietary drivecore technology eliminates hundreds of components within each amplifier, reducing the variability of component values, increasing reliability, resulting in incredible audio fidelity from an efficient design.

    Network control and monitoring- through Harman's hiqnet audio architect software, the CDi drivecore can be controlled, configured and monitored through standard TCP/IQ network.

    DSP - on-board digital signal processor in each amplifier allows for custom configuration
    • Input router
    • Input delay - Up to 1000 ms
    • Input parametric EQ - 8 band
    • Crossover
    • Output parametric EQ - 8 band
    • Output delay - Up to 100ms
    • LevelmaxTM limiter

    Direct drive 70/100 vrms output - each output channel is capable of provide either 70 V or 100 V for high impedance applications.

    Front-panel interface- completely configure the amplifier using an intuitive front-panel interface.

    GPIO/AUX Port- recall presets, mute channels, monitor faults, power on/off the amplifier and more through a combined GPIO/AUX port.

    Pre-loaded speaker tunings -For quicker and easier setup and installation.

    CDI-2-600
    Sub BrandCrownR
    SeriesCDi DriveCoreTM
    Model600
    Number of Channels2
    Power Output600 W at 4 Ohm, 600 W 70 Vrms (Dual Mode), 600 W at 4 Ohm, 1200 W 140 Vrms (Bridge Mono Mode)
    Input Impedance20 kOhm Balanced, 10 kOhm Unbalanced
    Sensitivity0.7 Vrms (8 Ohm, 37 dB), 1 Vrms (70 Vrms, 37 dB)
    Total Harmonic Distortion0.35% at 20 Hz - 20 kHz
    Signal-to-Noise Ratio>104 dB (100 V, 20 Hz - 20 kHz at 8 Ohm)
    Damping Factor>1000 at 20 - 100 Hz
    Frequency Response20 Hz - 20 kHz (+/-0.5 dB, 8 Ohm)
    Crosstalk>80 dB at 20 Hz - 1 kHz
    Digital Signal Processing96 kHz, 32-Bit Floating Point
    Voltage Gain34 dB
    AC Line Voltage100 - 240 VAC at 50/60 Hz
    Connection(1) Block 6-Pin Balanced Line Input, (1) Barrier Strip 4-Pin Speaker Output, (1) RJ-45 Ethernet Input/Output (Control)
    IndicatorsLED
    Display TypeLCD
    Rack Spacing2U
    Dimensions19 Inch W x 13.55 Inch D x 3-1/2 Inch H
    Weight14.56 lb
    File Download(s):Cut Sheet |User Guide |
    *
    *
    *