AUDIO AUTHORITY - LONG RANGE HDMI 1.4 HDBASET RECEIVER
Press and move to zoom.
Mouse over image to zoom.

Audio Authority

AUDIO AUTHORITY - LONG RANGE HDMI 1.4 HDBASET RECEIVER

SKU: AA-HBT200R
Status: Clearance 3 In Stock
Sold Per: Each

AUDIO AUTHORITY LONG RANGE HDBASET RECEIVER, HDMI 1.4 TYPE-A CONNECTOR, 20 - 60 HZ, 2.25 GBPS

HDBaseT Extender System Plus Two-way Control

Flawless HDMI performance and two-way control signal transmission make the HBT200 an essential tool for custom integrators. HDBaseT technology allows this system to send HDMI farther and at higher quality than any other HDMI transmission methods. It is a perfect solution for extending any HDMI source such as Blu-ray, game console, Apple TV, video server or the output from a matrix switcher. No compression and no loss of quality - just crystal clear 1080p with 3D, uncompressed audio, two-way IR control and two-way RS232 control over one Cat 5.

  • Supports 3D video transmission to compatible TVs
  • Two-way IR (input and output jacks on TX and RX units) excellent for use with automation systems from Control4 and RTI
  • Two-way RS-232 (single serial connection on TX and RX units) Crestron, AMX and Control4 compatible
  • Full HDMI and HDCP compliance
  • Upto 7.1 channel uncompressed audio transmission
  • DTS-HD Master Audio and Dolby TrueHD high bit rate audio

FEATURES

  • Uncompressed 1080p/60 (with 3D) HDMI signals
  • Requires one Cat 5e/6/7 network cable
  • Extends HDMI up to 330 ft via one Cat 5e/6 cable
  • Up to 7.1 channel uncompressed audio
  • IR control signals to equipment in the zone and rack
  • RS-232 control signals to equipment in the zone and rack
  • Supports 1080i/p, 720p and 480i/p resolutions and 24 hz, 30 hz, 50 hz, 60 hz refresh rates
  • Supports 48bit Deep Color
  • Lossless bitstream audio including Dolby TrueHD, DTS-HD Master Audio and Multichannel LPCM
  • Transmits RS-232 and IR signals bi-directionally
  • 1 year parts and labor limited warranty

APPLICATIONS

Long Distance HDMI Video Control Signals

In this application, HDMI video signals must be transmitted to a video projector located 330 ft from the rack. IR signals must be transmitted back to the rack and the video projector must be controlled via RS-232 commands from the rack location.

  • Video: 1080p video signals are transmitted uncompressed from sources, through an HDMI switcher and out to the zone via HBT200T.
  • IR: An IR remote control in the zone sends commands via an IR sensor in the room. The IR commands are sent through the HBT200R, over the Cat 5 cable and connect from the HBT200T back to a Satellite receiver in the rack.
  • RS-232: Serial commands from a control system in the rack are sent through the HBT200KIT to turn the projector on and off. Projector status signals are received back via the same Cat 5 pathway.

CERTIFICATIONS

FCC, CE, RoHS Compliant

AA-HBT200R
Type Long Range
Video Input 1 x Via HDMI Connector (Type-A)
Video Output 1 x Via HDMI Connector (Type-A)
Audio Output DolbyR TrueHD and DTS-HD Master Audio
Extension Input/Output Cat5e/6 UTP Cable, EIA-568B Modular Connector
IR Frequency 20 - 60 hz
Data Rate 2.25 Gbps (Single Link)
TMDS Clock Speed 225 Mhz
Color Depth 8/10/12 Bit
PC/DVI Resolution Upto 1920 x 1200 Reduced Blanking
Video Resolution 480i, 480p, 576i, 576p, 720p, 1080i and 1080p
HDMI Compliance 1.4 Compliant with 3D, 4k x 2k Support
HDCP Compliance 1.1
Maximum Cable Distance Transmitter to Receiver: 300 ft for 1080p/12-Bit (Cart5e or 6 Cable), Receiver to Display: 45 ft for 1080p/8-Bit, 30 ft for 1080p/12-Bit
Power Consumption 6 W
ESD Protection +/-8 kV (Air-Gap Discharge), +/-4 kV (Contact Discharge)
Temperature Rating 32 - 104 deg F (Operating), -4 to 140 deg F (Storage)
Relative Humidity 20 - 90% (Non-Condensing)
Dimensions 4 Inch W x 4.2 Inch D x 1 Inch H
Includes (2) 5 V/2.6 A DC Locking AC Power Adapter, Instruction Manual
Weight 8.6 oz
File Download(s): Cut Sheet | User Guide |