BINARY - 520 SERIES 1080P HD HDBASET WALL PLATE RECEIVER WITH IR & POC - 230 FT

Binary™ 520 Series 1080p HDBaseT Receiver with IR (In-Wall)

When you want to extend audio and video signals over long distances without sacrificing resolution or quality, a Binary™ HDBaseT Receiver is what you need. This one goes the distance, receiving up to 4K Ultra HD@30Hz video and 7.1 channels of lossless audio over a single CAT cable (when paired with a B-520 HDBaseT transmitter). It works with dedicated HDBaseT transmitters, as well as products whose transmitters are built in (such as B-520 matrix switchers) – providing flexibility and interoperability on the job. Plug and play technology allows this product to bypass frustrating EQ and EDID settings, and for the finishing touch it includes bi-directional IR for complete system integration. Note: The receiver is an in-wall version and fits in dual gang wall plate.

Power Supply Voltage - Binary HDBaseT HDMI extenders use a 12 Volt DC power supply.. Using any other product than a Binary 12V will result in damage to the product and possibly the power supply. Be sure to use the correct power supply with the correct product!

Shielded Cable Recommendation - Although HDBaseT transmission technology is much less susceptible to EMI interference than other transmission technologies, if possible, it is recommended that you pull shielded Cat5e/Cat6 with this product for maximum reliability. Please note: for proper shielding, shielded connectors must be used with drains connected at both ends. In addition, “EZ end” connectors are not recommended for use with HDMI extenders.

4K Ultra HD with Full 3D Support

This extender offers full support of 4K@30Hz (including HDMI® with 3D), Deep Color (36bit) and HDCP 2.2, as well as support for Dolby® True HD, Dolby® Digital Plus, DTS™-HD Master and LPCM audio formats. Please note, 4K support varies by distance and cable type. Please refer to specifications for further details.

Versatile Power

To simplify the install even further, you can use a single power supply for both transmitter and receiver. Just purchase our WPS-ACC-PWR-F and WPS-ACC-PWR-1X2.

Bi-Directional Power over Cable (POC)

With Bi-Directional Power over Cable (PoC), you can send power over the same Cat5e/6 cable that extends your video, audio, and control signals. This means you only need one power supply - and you can put it at the head end or display to get it completely out of the way. Plus, the extender features screw-down power plugs, so you never have to worry about getting service calls because a plug fell out when the TV was moved.

Complete Control

Thanks to bi-directional IR, you get no-hassle integration with a variety of control systems, and you can easily send IR signals from the TV location back to cable boxes, DVD players, and other source equipment at the head end. The IR connections feature active circuitry that supports a wide variety of IR and control system types.

IR Flexibility

The dip switch gives you better install flexibility by providing power when connected to an IR receiver or by shutting off when connected to control systems.

Built-In ESD and Surge Protection

Intelligent circuit design, perfected through extensive hardware testing, has resulted in a robust product with excellent ESD and surge protection that exceeds CE Level 3 standards. During development, every connection was tested with an ESD gun and a lightning simulator. They were hit with ESD at 15KV and surges up to 1600V.

Package Contents:

• (1) HDBaseT Extender Receiver as in-wall
• (4) screws
• (1) Dual gang wall plate
• (2) HDBaseT Label