Binary Media Distribution

BINARY - 4K ULTRA HD MEDIA OVER IP TRANSMITTER WITH AUDIO DOWNMIXING

SKU: B-900-MOIP-4K-TX-2AC
Status: 11 In stock
Sold Per: Each

BINARY 900 SERIES 4K HDR MEDIA OVER IP TRANSMITTER WITH AUDIO DOWNMIXING

Binary Series 4K Media over IP (MoIP) Transmitters with Audio Downmixing, when joined in a system with a MoIP Receiver (B-900-MOIP-4K-RX or B-900-MOIP-4K-RX-RAC) and one MoIP Controller, create a highly scalable, flexible IP media distribution system delivering visually lossless 4K HDR (HDR 30Hz and HDCP 2.2 compatible) video. Operating on a cost-effective gigabit Layer 2 PoE switch, this setup is the fastest and simplest out there. Plus, with Audio Downmixing and Audio Lip Sync adjustment, you'll have ultimate audio flexibility. Additionally, OvrC remote management allows for quick system setup, easy troubleshooting with access to live screenshots of source streams and fast, simple firmware updates. MoIP Transmitters also include a selection of audio features that allow dealers to solve issues on every job, including HDMI loop-out, audio breakout, and the ability to fix the audio to stereo or 5.1 multichannel. Lastly, RS-232, IR, and IP drivers for popular control systems provide tremendous flexibility in system design.

When installing Binary MoIP in an existing or new system, please ensure the latest firmware is installed. View the release notes.

A MoIP system can consist of any combination of 1 controller, a Layer 2 or above PoE Switch, MoIP transmitters with and without audio downmixing, and MoIP receivers with and without audio downmixing.

4K HDR
PoE
Up/Down Scaling
HDCP 2.2
Audio Breakout

Advanced Audio Capabilities

Dolby and DTS Audio Downmixing

Our Binary 900 Series 4K Media over IP Transmitter with Downmixing allows downmixing of multi-channel audio to 2-channel audio, eliminating the need to choose multi-channel or force downmixing, providing immersive multi-channel audio in one area while sharing throughout the space in 2-channel audio format.

Supported Audio

Binary 900 Series 4K Media over IP Transmitters and Receivers support Dolby Digital, Dolby Digital+, Dolby TrueHD, DTS, DTS-HD, and DTS-HD Master downmixing for ultimate flexibility in video and audio integration.

**The SPDIF input on the Receiver and output on the Transmitter is available for future use only.

Audio Lip Sync Adjustment
The Binary 900 Series 4K Media over IP Transmitters and Receivers with Downmixing support lip-sync adjusting for the analog output from 0ms to 250ms for perfect audio/video synchronization.
MoIP Backward Compatibility

The B-900-MOIP-4K-RX-2AC receiver and B-900-MOIP-4K-TX-2AC transmitter are designed to coexist with B-900-MOIP-4K-RX receivers and B-900-MOIP-4K-TX transmitters, letting you downmix when needed. Plus, decoders at each endpoint provide additional system flexibility. Downmix audio from each source into a multizone audio system, expand audio from a MoIP receiver to a secondary listening zone with only 2-channel audio, or both!

Visually Lossless 4K Video

MoIP encodes video up to 4K HDR using visually-lossless, variable bit-rate compression technology. The system is HDR and HDCP 2.2 compatible, resulting in an ultra-stable video stream, perfect audio/video sync and ultra-low latency (one frame).

Limitless Control Options

Switching of inputs (TX) to outputs (RX) is done through IP commands from a control system sent to the MoIP controller. Out of the box, the system supports three methods for controlling sources and displays: IR, RS-232 and CEC. IR or RS-232 commands can be issued via IP and generated at each endpoint. If desired, IR and RS-232 virtual routing can also be configured from any TX to any or all RX(s). Desired methods for issuing commands are selectable via the local UI. Lastly, for more basic installs where display on and standby is all that is needed, MoIP also supports CEC.

Real-Time Video Diagnostics

MoIP provides peace of mind when you leave the job. Not only is it inherently reliable, but there are a host of tools to assist in troubleshooting. Each transmitter provides a live screenshot of the source output, so you can quickly determine if the source is generating video. Additionally, deeper insights are readily available - such as resolution, refresh rate, color depth and HDCP version detected. Best of all, thanks to OvrC, all of this is easily accessed remotely so you can resolve issues caused by unpredictable sources - or customers - without rolling a truck.

Control System Integration

Our engineers have written drivers for the industry's leading control systems, including Control4, Crestron, ELAN, URC and more - so controlling the system has a familiar feel. Advanced features like IR routing and RS-232 over IP deliver even more flexibility and customization - and we've even provided the MoIP controller's API to create your own drivers if needed.

Perfect for Commercial Applications

From small offices to large-scale bars and restaurants, Binary MoIP allows you to distribute multiple sources to any number of screens, or even create stunning video walls. Binary is also compatible with applications like DTVGameControl, which helps your clients control and manage their devices.

The Binary MoIP Difference

The Fastest, Simplest Solution

Gone are the days of head-scratching system design, next-level network know-how and confusing configurations. Binary MoIP removes all that complexity, requiring only a Layer 2 PoE switch (210 and 310 Series), so you don't need a network guru to install it. OvrC-enablement, simple setup and intuitive user-interfaces enable you to go from power-on to picture in 5 minutes or less.

Flexible & Scalable

The Binary MoIP solution allows you to fit, scale, and upgrade the solution to match your client's specific needs. Need a 6x8 for one job and a 7x13 for another one? No problem. What about adding a video wall? Done. Instead of replacing the entire system, you can simply purchase new transmitters or receivers when adding sources or displays.

Ultra-Reliable HDR

With Binary MoIP, legacy EMI interference and HDCP/EDID issues are eliminated. Each source is encoded, visually lossless, at the highest quality possible (ex. 4K HDR). Then at each display, the signal is decoded from the network and scaled to the desired resolution (ex. 1080p or 4K HDR). Built-in scaling in the RX means that mixed 1080p/4K systems are no longer a problem, plus pass-through of all audio formats like Dolby Atmos and DTS:X are fully supported.

The Power of OvrC

Binary MoIP delivers something no other media product can - award-winning remote management. OvrC quickens initial setup by auto-discovering the controller, plus it provides unparalleled troubleshooting tools like real-time video screenshots

Standalone App

Thanks to our standalone app that's embedded into the controller firmware, your client's MoIP system can be operated outside a traditional control system. Follow easy installation steps to give users access to switching of sources, displays, turn off displays, and save scenes (ex: "Game Night") for easy recall.

2-Year Limited Warranty

This Binary product has a 2-year limited Warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty will not apply to products that have been abused, modified or disassembled. Products to be repaired under this warranty must be returned to SnapAV or a designated service center with prior notification and an assigned return authorization number (RA).

Features

Advanced Audio Capabilities

Dolby and DTS Audio Downmixing

Our Binary 900 Series 4K Media over IP Transmitter with Downmixing allows downmixing of multi-channel audio to 2-channel audio, eliminating the need to choose multi-channel or force downmixing, providing immersive multi-channel audio in one area while sharing throughout the space in 2-channel audio format.

Supported Audio

Binary 900 Series 4K Media over IP Transmitters and Receivers support Dolby Digital, Dolby Digital+, Dolby TrueHD, DTS, DTS-HD, and DTS-HD Master downmixing for ultimate flexibility in video and audio integration.

**The SPDIF input on the Receiver and output on the Transmitter is available for future use only.

Audio Lip Sync Adjustment
The Binary 900 Series 4K Media over IP Transmitters and Receivers with Downmixing support lip-sync adjusting for the analog output from 0ms to 250ms for perfect audio/video synchronization.
MoIP Backward Compatibility

The B-900-MOIP-4K-RX-2AC receiver and B-900-MOIP-4K-TX-2AC transmitter are designed to coexist with B-900-MOIP-4K-RX receivers and B-900-MOIP-4K-TX transmitters, letting you downmix when needed. Plus, decoders at each endpoint provide additional system flexibility. Downmix audio from each source into a multizone audio system, expand audio from a MoIP receiver to a secondary listening zone with only 2-channel audio, or both!

Visually Lossless 4K Video

MoIP encodes video up to 4K HDR using visually-lossless, variable bit-rate compression technology. The system is HDR and HDCP 2.2 compatible, resulting in an ultra-stable video stream, perfect audio/video sync and ultra-low latency (one frame).

Limitless Control Options

Switching of inputs (TX) to outputs (RX) is done through IP commands from a control system sent to the MoIP controller. Out of the box, the system supports three methods for controlling sources and displays: IR, RS-232 and CEC. IR or RS-232 commands can be issued via IP and generated at each endpoint. If desired, IR and RS-232 virtual routing can also be configured from any TX to any or all RX(s). Desired methods for issuing commands are selectable via the local UI. Lastly, for more basic installs where display on and standby is all that is needed, MoIP also supports CEC.

Real-Time Video Diagnostics

MoIP provides peace of mind when you leave the job. Not only is it inherently reliable, but there are a host of tools to assist in troubleshooting. Each transmitter provides a live screenshot of the source output, so you can quickly determine if the source is generating video. Additionally, deeper insights are readily available - such as resolution, refresh rate, color depth and HDCP version detected. Best of all, thanks to OvrC, all of this is easily accessed remotely so you can resolve issues caused by unpredictable sources - or customers - without rolling a truck.

Control System Integration

Our engineers have written drivers for the industry's leading control systems, including Control4, Crestron, ELAN, URC and more - so controlling the system has a familiar feel. Advanced features like IR routing and RS-232 over IP deliver even more flexibility and customization - and we've even provided the MoIP controller's API to create your own drivers if needed.

Perfect for Commercial Applications

From small offices to large-scale bars and restaurants, Binary MoIP allows you to distribute multiple sources to any number of screens, or even create stunning video walls. Binary is also compatible with applications like DTVGameControl, which helps your clients control and manage their devices.

The Binary MoIP Difference

The Fastest, Simplest Solution

Gone are the days of head-scratching system design, next-level network know-how and confusing configurations. Binary MoIP removes all that complexity, requiring only a Layer 2 PoE switch (210 and 310 Series), so you don't need a network guru to install it. OvrC-enablement, simple setup and intuitive user-interfaces enable you to go from power-on to picture in 5 minutes or less.

Flexible & Scalable

The Binary MoIP solution allows you to fit, scale, and upgrade the solution to match your client's specific needs. Need a 6x8 for one job and a 7x13 for another one? No problem. What about adding a video wall? Done. Instead of replacing the entire system, you can simply purchase new transmitters or receivers when adding sources or displays.

Ultra-Reliable HDR

With Binary MoIP, legacy EMI interference and HDCP/EDID issues are eliminated. Each source is encoded, visually lossless, at the highest quality possible (ex. 4K HDR). Then at each display, the signal is decoded from the network and scaled to the desired resolution (ex. 1080p or 4K HDR). Built-in scaling in the RX means that mixed 1080p/4K systems are no longer a problem, plus pass-through of all audio formats like Dolby Atmos and DTS:X are fully supported.

The Power of OvrC

Binary MoIP delivers something no other media product can - award-winning remote management. OvrC quickens initial setup by auto-discovering the controller, plus it provides unparalleled troubleshooting tools like real-time video screenshots

Standalone App

Thanks to our standalone app that's embedded into the controller firmware, your client's MoIP system can be operated outside a traditional control system. Follow easy installation steps to give users access to switching of sources, displays, turn off displays, and save scenes (ex: "Game Night") for easy recall.

2-Year Limited Warranty

This Binary product has a 2-year limited Warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty will not apply to products that have been abused, modified or disassembled. Products to be repaired under this warranty must be returned to SnapAV or a designated service center with prior notification and an assigned return authorization number (RA).

CERTIFICATIONS

CE, FCC, RoHS

Specifications

B-900-MOIP-4K-TX-2AC
Sub Brand Binary
Series 900
Video Resolution Up to 4K HDR at 30 Hz, 4K UHD at 30 Hz, 1080p HD
HDR Support HDR 20/24 Hz
Video Wall Support 2 x 2, 3 x 3, 4 x 4
Color Space RGB, YCbCr
Chroma Subsampling 4:4:4, 4:2:2, 4:2:0
Bandwidth 8.91 Gbps
Color Depth 8-Bit, 10-Bit, 12-Bit
HDMI Connections 1 x 19-Pin Type-A Female (In and Out)
Audio Format 2-Channel PCM, LPCM 2.0, LPCM 5.1, LPCM 7.1, Dolby Digital, Dolby True HD, Dolby Digital Plus, DTS, DTS-HD Master Audio, DTS NeoX
Audio Sample Rate 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
Audio Bit Depth Up to 24-Bit
Audio Input/Output Stereo Injection/Audio In: 1 x Mini Stereo 3.5 mm Jack, Stereo Breakout/Audio Out: 1 x L/R RCA Audio (Extraction Only When 2-Channel Audio is Present), Analog Audio In, Analog Audio Out, SPDIF Output
Control Type TX/RX Switching via MoIP Controller, 2-Way IR Routing, RS-232 via IP or Virtual Routing, Modify IR via 2-Way Routing or IP, Add Standalone App Embedded into Controller
IR Signal Frequency 20 - 60 kHz
IR Input/Output (1) 3.5 mm Stereo (Blue) 12 V Input, (1) 3.5 mm Stereo (Green) Output
DIP Switch Controls IR RCVR PWR OFF/ON, Serial/RS-232 DTE/DCE
Ethernet Pass Through 10/100Mbps 10/100/1000 Mbps
Port Type Ethernet: RJ-45 (T568B) LAN + PoE, RS-232: RJ-45 (EIA-561)
Compatible Cable Category Cat 5e/6/6a/7
Distance From Switch 100 m Maximum
Port Throughput 1 Gbps
Required Managed Switch Layer-2 Managed with IMGP Snooping
IP Address Assigned by Controller
System Configuration Supports Single Switch Deployments and Multiple Switch Deployments, On-Screen Device Identification, Auto Device Discover
Bit Rate 150 - 300 Mbps (Average), 850 Mbps (Maximum)
Latency 1 Frame (16 msec - 60 Hz, 33 msec - 30 Hz)
Power Consumption 7.5 W (PoE)
Temperature Rating 32 - 104 deg F (Operating), -4 to 140 deg F (Storage)
Relative Humidity 20 - 90% (Non-Condensing)
Dimensions 8.2 Inch W x 4.72 Inch D x 0.83 Inch H
Includes Mounting Ears, Mounting Ear Screws, Rubber Feet
You may also be interested in
BINARY - 4K ULTRA HD MEDIA OVER IP CONTROLLER
BINARY - 4K ULTRA HD MEDIA OVER IP TRANSMITTER
BINARY - 4K ULTRA HD MEDIA OVER IP RECEIVER