BINARY - 4K ULTRA HD MEDIA OVER IP TRANSMITTER
Press and move to zoom.
Mouse over image to zoom.

Binary Media Distribution

BINARY - 4K ULTRA HD MEDIA OVER IP TRANSMITTER

SKU: B-900-MOIP-4K-TX
Status: 14 In stock
Sold Per: Each

SNAPAV BINARYTM 900 4K UHD MEDIA OVER IP TRANSMITTER, 8.91 GBPS

BinaryTM 900 Series 4K UHD Media over IP Transmitter

BinaryTM 900 Series 4K UHD Media over IP Transmitters, when joined in a system with a MoIP Receivers B-900-MOIP-4K-RX and one MoIP Controller B-900-MOIP-4K-CTRL create a highly scalable, flexible IP media distribution system delivering visually lossless 4K UHD (HDR 30Hz and HDCP 2.2 compatible) video and all multichannel formats including Dolby Atmos and DTS-X. Operating on a cost-effective gigabit Layer 2 PoE switch, this setup is the fastest and simplest out there. Additionally, OvrC remote management allows for quick system setup, easy troubleshooting with access to live screenshots of source streams and fast, simple firmware updates. MoIP Transmitters also include a selection of audio features that allow dealers to solve issues on every job, including HDMI loop-out, audio injection, audio breakout and the ability to fix the audio to stereo or 5.1 multichannel. Lastly, RS-232-over-IP, 2-way IR routing and custom drivers for popular control systems provide tremendous flexibility in system design.

FEATURES

Visually Lossless 4K Video

MoIP encodes video up to 4K UHD using visually-lossless, variable bit-rate compression technology. The system is HDR and HDCP 2.2 compatible, resulting in an ultra-stable video stream, perfect audio/video sync and ultra-low latency (one frame).

Versatile Audio

Each MoIP transmitter features versatile options for distributing audio. Multichannel audio including Dolby Atmos and DTS:X can be sent to an AV Receiver with the HDMI loop-out. For 2-ch PCM sources, stereo analog can be extracted for routing to multi-room distribution amplifiers, or injected to replace the HDMI audio. Lastly, to reduce the risk of audio complications, the EDID can be fixed to control the audio formats as you desire.

Limitless Control Options

Switching of inputs (TX) to outputs (RX) is done through IP commands from a control system sent to the MoIP controller. Out of the box, the system supports three methods for controlling sources and displays: IR, RS-232 and CEC. Two-way IR routing can be configured from any TX to any or all RX(s), reducing the number of IR outputs required from the control system (no dongles needed). For RS-232 control, commands are sent via IP and generated at each endpoint. Lastly, for more basic installs where display on and standby is all that is needed, MoIP also supports CEC.

Control System Integration

Our engineers have written drivers for the industry's leading control systems, including Control4, Crestron, ELAN, URC and more - so controlling the system has a familiar feel. Advanced features like IR routing and RS-232 over IP deliver even more flexibility and customization - and we've even provided the MoIP controller's API to create your own drivers if needed

Real-Time Video Diagnostics

MoIP provides peace of mind when you leave the job. Not only is it inherently reliable, but there are a host of tools to assist in troubleshooting. Each transmitter provides a live screenshot of the source output, so you can quickly determine if the source is generating video. Additionally, deeper insights are readily available - such as resolution, refresh rate, color depth and HDCP version detected. Best of all, thanks to OvrC, all of this is easily accessed remotely so you can resolve issues caused by unpredictable sources - or customers - without rolling a truck.

The Fastest, Simplest Solution

Gone are the days of head-scratching system design, next-level network know-how and confusing configurations. Binary MoIP removes all that complexity, requiring only a Layer 2 PoE switch, so you don't need a network guru to install it. OvrC-enablement, simple setup and intuitive user-interfaces enable you to go from power-on to picture in 5 minutes or less. View the recommended 210 series and 310 series PoE switches.

Flexible and Scalable

The Binary MoIP solution allows you to fit, scale, and upgrade the solution to match your client's specific needs. Need a 6x8 for one job and a 7x13 for another one? No problem. What about adding a video wall? Done. Instead of replacing the entire system, you can simply purchase new transmitters or receivers when adding sources or displays.

Ultra-Reliable, Ultra HD

With Binary MoIP, legacy EMI interference and HDCP/EDID issues are eliminated. Each source is encoded, visually lossless, at the highest quality possible (ex. 4K UHD). Then at each display, the signal is decoded from the network and scaled to the desired resolution (ex. 1080p or 4K UHD). Built-in scaling in the RX means that mixed 1080p/4K systems are no longer a problem, plus pass-through of all audio formats like Dolby Atmos and DTS:X are fully supported.

The Power of OvrC

Binary MoIP delivers something no other media product can - award-winning remote management. OvrC quickens initial setup by auto-discovering the controller, plus it provides unparalleled troubleshooting tools like real-time video screenshots.

2-Year Limited Warranty

CERTIFICATIONS

  • CE, FCC and RoHS Compliant
B-900-MOIP-4K-TX
Sub Brand BinaryTM
Series 900
Type 4K UHD
Video Resolution Transmitter: Upto 4K UHD at 60 hz 4:2:0, 4K HDR at 30 hz, 4K UHD at 30 hz 4:4:4 8-Bit Plus Full 1080p HD and Lower Resolution Including Interlaced Video Formats, Receiver: Upto 4K UHD at 30 hz 4:4:4 8-Bit HDR Content when Available 4K HDR at 30 hz 8-Bit Integrated Scaler to Support 4K, HDCP 2.2 on 1080p, HDCP 1.4 Displays
Integrated Video Scaler Yes (4K, 1080p)
HDR Support HDR 20/24 hz
Video Wall Support 2 x 2, 3 x 3, 4 x 4
Color Space RGB, YCbCr
Chroma Subsampling 4:4:4, 4:2:2, 4:2:0
Bandwidth 8.91 Gbps Maximum
Pixel Clock 297 Mhz
Color Depth 8-Bit, 10-Bit, 12-Bit
HDCP Compliance HDCP 2.2
HDMI Compliance HDMI 2.0b
HDMI Connections 19-Pin Type-A Female In/Out
Audio Format PCM 2-Channel, LPCM 2.0, LPCM 5.1, LPCM 7.1, DolbyR Digital, DolbyR True HD, DolbyR Digital Plus, DolbyR AtmosR, DTSR, DTSR-HD Master Audio and DTSR NeoX
Audio Sample Rate 32 khz, 44.1 khz, 48 khz, 88.2 khz, 96 khz, 176.4 khz, 192 khz
Audio Bit Depth 24-Bit
Audio Input/Output Mini Stereo 3.5 mm Jack Audio In, L/R RCA Audio Out, Analog Audio In and Out
Control Type TX/RX Switching MoIP Controller, 2-Way IR Routing
IR Signal Frequency 20 - 60 khz
IR Input/Output (1) 3.5 mm Stereo (Blue) 12 V Input, (1) 3.5 mm Stereo (Green) Output
DIP Switch Controls IR RCVR PWR OFF/ON, Serial/RS-232 DTE/DCE
Ethernet Pass Through 10/100Mbps 10/100/1000 Mbps
Port Type Ethernet: RJ-45 (T568B) LAN + PoE, RS-232: RJ-45 (EIA-561)
Cable Category Cat 5e/6/6a/7
Distance From Switch 100 m Maximum
Port Throughput 1 Gbps
Required Managed Switch Layer-2 Managed with IMGP Snooping
IP Address Assigned by Controller
System Configuration Supports Single Switch Deployments and Multiple Switch Deployments, On-Screen Device Identification, Auto Device Discover
Bit Rate 150 - 300 Mbps (Average), 850 Mbps (Maximum)
Latency 1 Frame (16 msec - 60 hz, 33 msec - 30 hz)
PoE Consumption 7.5 W
Temperature Rating 32 - 104 deg F Operating, -4 to 140 deg F Storage
Relative Humidity 20 - 90% (Non-Condensing)
Dimensions 8.2 Inch W x 4.72 Inch D x 0.83 Inch H
Includes Mounting Ears, Mounting Ear Screws, Rubber Feet
File Download(s): User Guide | Installation Instruction |