MODEL-P2280-EQ |
INPUTS |
Inputs: 6 Stereo Local Analog Inputs, 1 Stereo Bus Digital Input, 1 Stereo Bus Analog Input
Input Sensitivity: Variable 0-1 Vrms
Analog Input Sensitivity: 1 Vrms for full output; level at maximum |
OUTPUTS |
Amplifier Channels: 12
1 Stereo Bus Analog Output
Power Output (8Ω): 100W per channel
Power Output (4Ω): 200W per channel
Power Output (Bridged Mono): 400W
Minimum Speaker Load: 4Ω
|
PERFORMANCE |
Damping Factor: >300
Signal to Noise: >105 dB, (A-wtd, ref full output)
Crosstalk: >80 dB @ 1kHz
Gain: 30 dB
Analog Input Sensitiviy: 1 Vrms for full output, level at maximum
DAC Specifications: 32 – 96 kHz sample rate, 16/24 bit depth |
EQUALIZER |
Centers: 75 Hz, 250 Hz, 700 Hz, 2.5 kHz, 12 kHz
Range: +/- 12 dB |
CONTROL |
Remote Power Trigger: +12 VDC or Dry Contact Closure, 2 x 1/8″ TS mono in/out |
AC POWER REQUIREMENTS |
Standby: 0.9W
Idle (main power on, all channels off): 52W
All channels active: 87W
All channels 1/8th rated power: 265W
Full power (20A residential service limited): 2400W
Protection: clipping, short circuit, thermal, ultrasonic, DC offset, stable into reactive or mismatched loads |
BTU/HR OUTPUT |
Standby: 3.1 BTU/hr
Idle (main power on, all channels off): 178 BTU/hr
All channels active: 270 BTU/hr
All channels 1/8th rated power: 361 BTU/hr
Full power (20A residential service limited): 2194 BTU/hr |
WEIGHT & DIMENSIONS | Dimensions: 19″ W (w/rack ears) 17” W (w/no rack ears) x 15.5” D x ” H 3.5″ (2U)
Weight: 20.0 lbs (9.1 kg) |
IN THE BOX |
Architect Model P2280 EQ, Speaker Connectors, Remote Connector, Power Cord, Manual |