Press and move to zoom.
Mouse over image to zoom.



Status: 3 In stock
Sold Per: Each


The Atlona AT-UHD-CLSO-612ED is an advanced six-input, multi-format switcher with 4K scaling, Ethernet-enabled HDBaseT™ and PoE capabilities. It simplifies classroom and small office system integration by providing two HDBaseT inputs, two HDMI inputs, two multi-function analog inputs, plus mirrored HDBaseT and HDMI outputs. Advanced Automatic System Control (AASC) features on the switcher provide automatic display control and automatic input selection. Ethernet pass through on the switcher enables control signal pass-through and Internet distribution. The AT-UHD-CLSO-612ED contains a full RS-232 signal distribution system to route control signals to local sources and displays. Professional audio features such as a microphone input with 48-volt phantom power and ducking eliminates additional voice-lift audio needs. The switcher is configured and managed by Atlona Management System software to reduce installation time and enable remote support. The AT-UHD-CLSO-612ED addresses a wide array of AV switching and processing needs often encountered in classrooms, conference rooms, boardrooms, training rooms and other presentation settings.

The AT-UHD-CLSO-612ED is designed to be the central component of an automated AV system. Automatic display control turns on the display automatically whenever a source is connected. When the source is removed, the display is turned off. Volume is controlled by using the front panel buttons and by RS-232 or TCP/IP commands. With automated input selection for active input selection, third-party control systems can be eliminated. The AT-UHD-CLSO-612ED combines the benefits of a scaling switcher with Advanced Automatic System Control and the advantages of Ethernet-enabled HDBaseT signal transmission to extend AV and control signals over a single cable. In addition to automated input selection, the switcher can be controlled via the Atlona AT-ANC-108D 8-Button Network Control Panel.

Automatic Display Control

The AT-UHD-CLSO-612ED allows display control using CEC, TCP/IP or RS-232 signals. This means that many more types of displays can be controlled, costs are reduced, and that wiring is simplified. In a commercial setting, when a switcher is integrated with a display, the AT-UHD-CLSO-612ED forces the display to power on automatically when a laptop is connected. At the end of the presentation, when the presenter disconnects the laptop, the AT-UHD-CLSO-612ED forces the display to power off. Ease of presenter interaction with the system and the savings incurred by auto-display shutdown provide a significant return on investment.

  • CEC – The AT-UHD-CLSO-612ED features Consumer Electronics Control (CEC) providing simplified display control for a significant reduction in the cost of the display (compared to an RS-232 controlled display). CEC is a communication channel incorporated in the HDMI specification allowing connected devices to control each other.
  • TCP/IP – The TCP/IP signal can be transmitted either through an independent LAN connection or through the HDBaseT connection when connected to an AT-UHD-EX-100CE-RX receiver which allows Ethernet over HDBaseT. The LAN port on the AT-UHD-CLSO-612ED not only connects to the switcher, it also extends out the HDBaseT connection through an internal hub. A connected router is required to manage IP addresses.
  • RS-232 – Many displays including projectors, commercial flat panel displays, and some consumer displays can be controlled using the RS-232 signal directly from the switcher. The scaler is able to send commands using RS-232 for automatic display control to compatible displays.
  • FLEXIBLE, POWER BUTTON – The power button on the front panel can be set to either turn the AT-UHD-CLSO-612ED on/off or it can be set to control the attached display. In addition to using the front panel power button, display on/off commands can be triggered automatically based on presence of video signals, or by a third-party control system using either TCP/IP, RS-232, or IR signals.
  • SWITCHER OR DISPLAY VOLUME CONTROL – Volume control buttons on the front panel can control either the analog audio output of the AT-UHD-CLSO-612ED or they can be set to control the volume of any device that allows volume control using TCP/IP or RS-232, such as a flat panel display, DSP, or another switcher. This gives great flexibility to the system design.
  • MULTIPLE POINTS OF CONTROL – Since all these commands can be sent using TCP/IP, it becomes simple to have multiple control points in a larger system. The AT-UHD-CLSO-612ED could be used with the HDVS-200 series transmitters as remote input devices allowing remote presenters to determine what is presented on the displays using front panel controls on the HDVS switcher for functions such as “Show me” and volume.

Reliable Auto-Switching

Automatic input selection on the AT-UHD-CLSO-612ED detects an active video signal, rather than looking for the 5-volt, hot plug signal. This means that devices such as DVRs, DisplayPort adaptors and other devices that keep the 5-volt hot, no longer trigger the automatic input selection. This gives far more reliable performance with these products.

RS-232 Distribution to Sources and Destinations

A bi-directional RS-232 connection is available at every local input and output on the AT-UHD-CLSO-612ED. Along with RS-232 signal distribution built into each HDBaseT link, the switcher has a powerful capability to route control signals to each source, display and into each zone. The switcher lowers the cost of a third-party control system by allowing one with fewer RS-232 interfaces.

Microphone Input with Ducking

Professional audio features such as a microphone input with 48-volt phantom power and ducking are also included, allowing the switcher to address a wide array of AV switching and processing needs often encountered in classrooms, conference rooms, boardrooms, training rooms, and other presentation settings.

The Switcher for Classrooms and Small Offices

The AT-UHD-CLSO-612ED eliminates the need for multiple components and simplifies the important steps in getting content from any source to whatever display and audio system the customer is using, including 4K monitors or projectors. The switcher addresses customers’ needs to provide inputs on lecterns, conference tables, and locations distant from the switcher.

The AT-UHD-CLSO-612ED utilizes PoE technology to power remote HDBaseT transmitters and receivers. Combining multiple components to address each process – scaling, converting, and delivering the signal to the display – into a single solution reduces system complexity and cost and increases reliability.

The AT-UHD-CLSO-612ED is ideal for:

Use in classrooms, training environments, and meeting room applications where system requirements include:

  • A variety of analog and digital sources located at a distance from the central equipment rack and near the switcher
  • Automatic display control and automatic input selection
  • Mirrored confidence monitoring for the main presentation
  • 4K/UHD up or down-scaling
  • Complete System Applications – The switcher accommodates two HDBaseT and two HDMI 4K sources plus two VGA or other analog sources in classrooms, huddle rooms, and small conference rooms. In these applications, the switcher offers automatic input selection, HDBaseT transmission, scaling and control functions. With audio de-embedding and volume control, it is easy to connect to an amplifier and speakers for better audio. Included are IP configuration/management and other advanced installation functions such as IP display control, CEC display control for consumer displays and Ethernet-enabled (100 m) HDBaseT performance. The CLSO Series incorporates many integrator-requested features while still maintaining overall value.
  • Efficient System Applications – The AT-UHD-CLSO-612ED can also go directly to a projector with an HDBaseT input. Control is transmitted using CEC, IP and RS-232. The AT-UHD-CLSO-612ED is certified by the HDBaseT Alliance for compatibility.
  • Campus Installations – Atlona’s new IP management software, AMS, enables easy discovery, configuration, updates and management of Atlona IP enabled devices such as the CLSO Series.

*Consumer Electronics Control (CEC): Atlona does not guarantee the function of CEC with all televisions. We can confirm proper operation with many current Samsung, Panasonic, and Sony TVs. Many manufacturers do not support the CEC “off” command when sent from a source and older TVs use proprietary commands. Atlona only supports those TVs that follow CEC command structure from HDMI 1.2a and support the “off” command when issued by a source. We encourage any dealer to get evaluation product from Atlona prior to designing a system around this control technology or be prepared to use other methods to control their displays if Atlona CEC is not compatible with the installed displays.

Configured and Managed by AMS

The AT-UHD-CLSO-612ED also supports the Atlona Management System (AMS), a powerful network software platform that integrates product configuration, management and updating. Specially designed for IP-controllable Atlona Products, the Atlona Management System reduces installation time and enables remote monitoring and support. To learn more please visit AT-SW-AMS.


Two Ethernet-enabled HDBaseT inputs

  • Works with Atlona HDVS-150/200 or AT-UHD-EX-100CE-TX-PD series transmitters for placement at remote sources near lecterns, conference tables, and instructor’s desks up to 328 feet (100 meters) from the switcher
  • Simplifies integration of remote sources by eliminating power supplies when used with PoE-powered transmitters. Single category cable carries AV signals, Ethernet, control and PoE power

Two HDMI inputs

  • Digital inputs to support two DVI, HDMI or DisplayPort sources
  • Works with PCs, Blu-ray players, document cameras, teleconference systems, wireless solutions with industry standard digital AV outputs

Two multi-function analog inputs on 15-pin HD connectors

  • Accepts RGBHV, component, S-video, or composite signals using common adaptors and breakout cables
  • Provides input options for legacy analog sources

Automatic display control

  • Automatically changes projector power state based on active or standby mode of switcher. Control signals transmitted via CEC, IP, or RS-232
  • Eliminates need for complex control system in AV systems. Enables display and volume control. CEC enables control of low-cost consumer displays
  • Any product that has mirrored output with HDMI and HDBaseT will have CEC functionality through the HDBaseT output
  • Automatic input selection using video detection technology

    • Selects active input when sources are connected or if there is a change in source power status
    • Eliminates need for complex control system in AV systems
    • RS-232 control signal distribution

      • Dedicated RS-232 connections for all local sources and destinations plus transmission over HDBaseT allow the switcher to be used as a RS232 distribution system to all local and remote sources and displays
      • Lowers the cost of control system integration by reducing the number of RS-232 interfaces on the processor

      4K/UHD @ 30 Hz capability

      • Compatible with Ultra High Definition sources and displays
      • Supports high resolution applications such as CAD, desktop publishing, and detailed financial reporting

      Built-in 4K scaler

      • Scales to and from most resolutions up to 4K to optimize content from any source to any monitor or projector up to 4K; Down-scaling allows 4K sources to be displayed at 1080p or less
      • Eliminates the need for external scaling components. Preferred input resolution can be easily set for best results

      Mirrored, dual outputs on HDBaseT and HDMI

      • Supports dual display applications with both local and extended distance displays up to 328 feet (100 meters); designed to work directly with HDBaseT-capable displays and Atlona AT-UHD-EX-100CE-RX receivers
      • Eliminates cost associated with extra distribution and extension components; simplifies installation. HDMI output allows additional HDBaseT transmitter for dual long distance applications.

      AV and control over HDBaseT

      • Delivers 4K/UHD video, audio, Ethernet, and control through a single cable
      • Eliminates multiple cable runs between source, control system, and display

      PoE for remote-powered HDBaseT receivers and transmitters

      • Provides remote power to Atlona EX-100CE-TX-PD and HDVS-150/200 series of transmitters and UHD-EX-100CE-RX receivers over the same category cable used for AV and control signals
      • Eliminates local AC outlet required for extender device, cleans up the installation behind displays, plus saves time and integration costs

      TCP/IP, RS-232, and IR control of switcher

      • Compatibility with third-party control systems provides flexible control options, RS-232 controlled from HDBaseT connection
      • Reduces integration time and costs

      EDID management

      • Manages EDID communications between source and switcher; allows integrators to force sources to preferred resolution
      • Ensures desired audio formats and video resolutions are provided to the AV system; eliminates the need for EDID management device

      HDCP management

      • Allows non-protected material from PCs to pass to non-compliant displays and teleconference systems while protected content is not transmitted
      • HDCP compliance can be switched on/off from control systems for use with non-compliant displays, streaming devices, and codecs

      Balanced line/mic input with 48V phantom power

      • Provides professional audio input for wired and wireless microphones
      • Saves installation costs by eliminating external audio mixer
      • Microphone ducking with advanced controls

        • Automatically reduces program audio levels when mic is used
        • Ensures optimized voice-over performance

        Audio de-embedding

        • De-embeds PCM audio from HDMI inputs to analog audio output
        • Provides audio signal routing to sound system

        Independent audio input switching

        • Switches analog audio inputs separately from video sources; allows analog audio signal embedding for DVI sources
        • Simplifies audio signal management from DVI sources

        Balanced, stereo audio output on 6-pin captive screw connector

        • +4 DB nominal audio interfaces with analog commercial sound systems
        • Maintains proper audio gain structure; eliminates adaptors

        Adjustable volume and EQ

        • Features independent gain control for each input, master audio level control, bass and treble EQ adjustment
        • Optimizes audio signals eliminating the need for an external mixer

        Front panel volume and mute controls

        • Volume up and volume down buttons adjust output level to sound system
        • Provides quick level adjustment for operators

        Easy, GUI-based configuration using integrated web server

        • ?Offers menu-based configuration of network settings, RS-232 settings, input switching, EDID and HDCP management and audio
        • Allows fast configuration of internal product settings and troubleshooting from a tablet, smart phone or PC in the field

        IP to RS-232 translation

        • Converts TCP/IP commands to RS-232 commands for output to external devices
        • Enables single IP connection to control processor to control both IP and RS-232 connected devices. Faster installation
        • Nine RS-232 I/O ports

          • Six RS-232 ports and three HDBaseT RS-232 ports to control other devices in the system
          • Reduces cost associated with complex control processors

          RS-232 and IR HDBaseT insertion

          • Adds control signals to the HDBaseT transmission including RS-232 and bi-directional IR
          • Simplifies display control from third-party control systems

          Rack mountable 1U, full rack width enclosure

          • Installs easily in rack mounted systems with included 19” rack and wall mount brackets
          • Reduces installation time and cost

          Works with AMS

          • This IP-controllable product can be remotely managed by the Atlona Management System software
          • Integrates product configuration, management, and updates to reduce installation time and enable remote support
          ,p>Included accessories

          • User guide, desktop power supply, detachable power cable, IR hand held remote control, rack mount bracket kit

          Award-winning 10 year limited product warranty

          • Ensures long-term product reliability and performance in residential and commercial systems
Video 4096×2160@24/25/30Hz, 3840×2160@24/25/30Hz, 2048x1080p, 1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480i
VESA 2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600, 640×480
Color Space YUV, RGB
Chroma Subsampling 4:4:4, 4:2:2
Color Depth 8-bit, 10-bit, 12-bit
Analog IN/OUT PCM 2Ch
HDMI IN & HDBaseT OUT PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby Digital, DTS 5.1, Dolby Digital+, Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X
Sample Rate 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
Bit Rate up to 24-bit
CAT5e/6 @ 4K up to 70 meters up to 230 feet
CAT5e/6 @ 1080p up to 100 meters up to 328 feet
CAT6a/7 @ 4K up to 100 meters up to 328 feet
HDMI IN/OUT @ 4K up to 5 meters up to 15 feet
HDMI IN/OUT @ 1080p up to 10 meters up to 30 feet
Bandwidth 10.2 Gbps
HDCP Switchable – Complaint/Non-compliant – 1.4
Operating 0°C to 50°C 32°F to 122°F
Storage -20°C to 60°C -4°F to 140°F
Humidity 20 to 90% non-condensing
Consumption 43W
Idle Consumption 4W
Supply Input: AC100-240V ~ 50/60Hz 
Output: DC 48V/3.125A
H x W x D 44 x 438 x 254 (mm) 1.73 x 17.24 x 10 (inch)
Unit 3.22 kg 7.10 lbs
Unit CE, FCC
Power Supply CE, FCC, Level VI, RoHS, cULus, RCM, CCC
File Download(s): Manual | Datasheet | Firmware |