FSR DIGITAL RIBBON CABLE PULLING SOCK FOR USE WITH HDMI DIGITAL RIBBON EXTENDER CABLES AND ANY CABLE WITH DISPLAYPORT, HDMI, F, BNC AND RCA CONNECTORS, PET SLEEVE, POLYOLEFIN (HEAT SHRINK) BOOT, STEEL TIP, GREEN, RED OR YELLOW
The DR-SOCK is a handy cable pulling tool designed with cable installers in mind. It protects cables and connectors from being damaged by taking the stress off of the connection points while pulling.
DR-SOCK can be used to safely pull FSR's HDMI digital ribbon extender cables, as well as any cable with DisplayPort, HDMI, F, BNC and RCA connectors.The design opens to 1.25 Inch and provides three layers of protection for the connector.
The connector on the cable is inserted into the inner braided jacket and held in place with ordinary electrical tape. The outer jacket is then slid over the inner jacket and taped to the cable jacket to provide a secure pull. The steel ring at the end of DR-SOCK is attached to a snake or other pulling device. The cable is now ready to be pulled.
The DR-SOCK is a must have for any installer's toolbox. Reach for it on every installation.